© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I recently put 4s's on mine and absolutely love them. I had them on my old gt3 as well. I have cup 2's on my gt3 touring. They are sticky and...
I have had USAA since I began driving, and only recently had my first ever claim for a broken windshield. It was for my wife's yukon denali, and...
For those with Hagerty Insurance, what has been your experience, especially in the case of a claim? I am considering to switching to them from my...
I had a 997.2 GT3 for 5 years, and stored/exercised a friend's 997.2 GT3 RS. I sold the GT3 to buy a GT3 touring. I've had the scud 6 years, and...
What about this diagnostic unit?...
The machine shop I was referred to said it would take too much time to mount the headers to machine them. They referred me to another shop to...
I looked into the Wurth weights, and they seem to sell only in bulk. I checked Ricambi, and it looks like they sell the original weights in small...
Does anyone have a source for wheel weights for the Scuderia grey wheels? I got a new set of tires mounted, and the wheel weights that the had...
458 is a little softer and more refined, and a very different platform and feel compared to the 430. Both are meant to be more to more people....
I have had my scud for 5 years now, so by most metrics on fchat I should be tired of it by now, but I wouldn't trade it for a 991.1 or .2 GT3RS....
Has anyone tried upgrading the low beam bulb to LED? I do a lot of driving at night, and the low beams are pretty weak compared to the newer...
Different strokes for different folks; we've all voted with our wallets as to which cars we own. Some are even lucky enough to have both or all...
Trickle charger will charge it, but will just take more time.
I have both, and I like my Scud better. The GT3T is a better car, a sweet manual, and absolutely fantastic in every way, but the Scud is more...
Tubi flange thickness is 13mm. I think someone alredy posted stock as 12.5mm above.
I can measure the flange thicknesses and post them up. The machine shop commented that the factory flange material seem rather soft. We used a...
Thanks Mike, but the broken studs are already out
I'll order a set of the center drill bits. Thanks for that. After this project, I was going to order a 90 degree drill, left had bits, and...
Thanks for explaining that. I talked to the machine shop today, and they said the headers were too warped to resurface, so it looks like they are...
He punched the center of the stud, drilled it out enought to insert an ez out, and turned it by hand. I soaked it w/ penetrant ahead of time, and...
