© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Something to help you guys with - posting I made last week for others who wanted to change their headunits as well:...
That's correct. It can be a b|tch to get access to, from the top. I accessed it from the bottom (removing the underpanel) after hoisting the car...
This is the one I use. Just leave it plugged into the car. ScanGaugeE : Linear Logic - Home of the ScanGauge
I'm using an Exide DIN66 battery, if that helps.
Correct. Main compatibility is the pressure ratings which are both identical. The first unit would reduce confusion when hooking up the wire for...
Worked extremely well. Rock stable (no fluctuations, even at idle) and predictable oil pressure since the day I fitted it until now.
Sounds like what happened with my oil pressure sensor. Remove the sensor (situated below the oil filter) and try cleaning and fitting it back....
+1. Tighten up the gas cap as above ^.
Ouch. Something more sinister (hopefully not)... Like you mentioned, check the battery cut off switch first. Secondly, crawl until the passenger...
Sounds like this issue here: http://www.ferrarichat.com/forum/360-430/419953-key-fob-wont-unlock-door-car-wont-start.html From my reply, "Check...
Yep. BLAUPUNKT: Loudspeakers
Here's the actual pieces which I have used: VV Audi 20 PIN Mini ISO Block Adapter Cable Connector FOR Audio MP3 Changer ASO | eBay Male TO...
Blaupunkt. Just get an iso adapter, and it's literally a plug and play install. Extremely easy. [ATTACH]
Congratz!!! Lucky find, especially the CF seats!!! :O
This was mine. It actually blew a fuse, which disabled the car. [ATTACH]
Try disconnecting the subwoofer system (and any aftermarket electronic/electrical additions including the headunit, if it's not the standard...
Happened to me as well. Common 'issue' with the 360s.
Cool. Thanks heaps for the detailed information. Saved me quite a bit of headaches with the hose sizes too. :) Cheers.
Good idea actually. Could you post up more pictures, especially on the mounting points and inlet/outlet connections? Thanks in advance.
Great info. Thanks.