© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
It seems DC Johnson is still around (sort of) and they are selling the manual in Steve's photo above. I'll get a copy...
Thank you very much Steve! The car has not run under my ownership and I have a normal non-cat ANSA muffler installed (OEM I believe). I think...
Hi all, sorry for all the questions lately- I've been making good progress getting my 85 308 QV euro back together. I should have it up and...
I bought a full set from Superformance but I'm unsure the diameter. It fit just fine into the cap but the hole wasn't 'deep' enough.
Hi all, this is probably a dumb question but I'm wondering if the gray plastic I'm seeing in the caliper piston is a cap that I should have...
Hi there, I picked up a pair of ignition caps and rotors for my 85 QV euro from superformance. They are not of the quality that the original parts...
Got side tracked installing a cd player and speakers, will get back to the antenna this weekend I hope. Will post a follow up. Thanks for all the...
Excellent point, I'll swap them around. Thank you
Hi again, my tail lights look to be original and are in good condition, but are a bit dirty and yellowed. I was looking for tips on cleaning /...
Thanks for the quick advice everyone! I can't tell if there is a cable passing through, but if so I would just plug the hole with a small rubber...
Hi there, kind of a random question but is there any trick to removing this cell phone antenna mount from my rear windscreen? I started getting...
Vermouth is great over ice, not too strong and tells a complex story. Punt y mes or Lillet are good starters IMO
Looks like roughly 12" tall by 20" long by 3/4 thick
I didn't weigh the old and new fans / adapters but if there is any weight savings I suspect it would be pretty small
It's the condenser from the Classic Auto Air kit. Installation of the condenser was a total pain in the ass because the brackets they include dont...
Installed the fan upgrade kit from ebay seller "valtermotousa". Pretty easy but would have been nice for them to include a few rubber strips...
OK, looking into this more, seems I dont have a euro mount, nor a USA mount. Seems like a custom job done to federalize the car back in the 80's....
This photo shows the damaged RF bumper. I could try to epoxy it back together... [ATTACH]
Hi there, I have an 85 QV Euro that was imported to the USA (CA) from France in 1985 and 'federalized' by someone back then. The front bumper is...
last note here is that for the heater hose 5/8 is 'close enough' but I think the specification is actually 16mm (recall 5/8= 15.9mm). I believe...
