© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have the Sport exhaust with Fabspeed headers. Excellent sound with all the burbles and pops. Forza valve controller hardwired to an open switch...
Timely question for me... I am considering sending my headlights off to clear corners this summer. If not them, then who can do them? Sent...
Here is the one you want: Pierburg Electric Valve Electrical 12 V 7.22687.39.0#OEM 078906283A For FERRARI 178309
ttforcefed, I think I gave you the wrong part...the Bosch Purge Valve is part of the EVAP system (I replaced those too). You can look at Ricambi...
BTW, I also have the factory sport exhaust with FS headers. You can DEFINITELY tell the difference. I have the Forza controller with a 3-way...
I had the same issue. Turns out the solenoid was clogged and leaky with rubber debris from the hose between the solenoid and the vacuum valve....
I've removed mine when I did a paint correction/polish. Yes, just pry (or snap) the clips off. I was able to retrieve one, but not the other....
tbakowsky, Looks beautiful! I want to remove the intake plenum on mine as well. Looks simple enough, but what's that connection at the front of...
tbakowsky, I want to remove the intake plenum on mine as well. Looks simple enough, but what's that connection at the front of the engine? There...
Just guessing, but I would think longer wire = more resistance so the actual coil may have to "account" for that resistance. Hence the greater...
You mentioned a "slight rattle near the exhaust"... are you sure it's the O2 extenders and not the valves? The valves are notorious for rattling,...
EGR isn't correct... I replaced the "flush valve" on the left side as part of the anti-evap system. I found it for $40 so worth a shot I figure....
I've got an Autel AP200 and quite often pull codes and check clutch wear. Over the last several months and 2000 miles or so I keep getting:...
Here's a couple pics with the cluster lit... [ATTACH] [ATTACH]
If you're asking about the difficulty in removing the gauge cluster, then yes, very easy. The two larger connections on the back were a little...
I'll try to get a pick tonight. It looks marvelous!
Yeah, I'm kinda ambivalent on the font; could go either way. But agree, I like the yellow ALOT better. And the job was surprisingly easy....
That sounds right. Half a can covers the entire exterior.
Just did this mod yesterday. Looks fantastic! Definitely good for +10hp! [ATTACH] [ATTACH]
Yeah, there's a duplicolor code that's amazingly close. I use it a couple times a year to patch mine up. Don't remember off the top of my head,...
