© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Yes, I removed them. I did everything by the book.
1983 Ferrari 308 Gts/QV US. Has anyone experienced the spark plug boots ant extenders falling off the spark plugs. I feel like pressure, or...
1983 Ferrari 308 GTS/ QV
Does anyone know if it's just a simple idle adjust and what should the rpm be running at. I have them at about 1100rpm right now so the engine...
My engine is has a rough idle at cold start and when it’s hot what needs to be adjusted. Is it the actual idle or could it be a vacuum hose. The...
Thank you for the information. I will be hooking the battery up tonight and giving it a go. Hopefully all goes well.
does anyone know about the 1983 wiring diagram showing the D+ from the alternator going to another alternator before going to fuse panel and...
I did not hijack any thread I started this thread about issues I have been having with my alternator. I have a good alternator but not charging my...
Would you have the full picture you sent me. I had my alternator checked and it tested good. So it has to be one of the wires coming off the...
I notice now that my transmission is engaging when I start the car as well. Man if it’s not one thing it’s another with these cars.
I checked all coneections cleaned them also. No luck on that working. It must be the alternator. Not sure what else to look at.
thanks I am head out to look at all the connections. thanks for the information. fingers crossed. I hope to chat with you later on what I find.
You said to replace the connection stud not just clean it? I need to replace it need to take the whole starter out.
I was thinking about what you said about the starter stud. The car still starts the alternator is not working. If that lug was bad then the car...
thanks for the info I will do that today. I hope that is the problem.
I looked at the alternator the belt is still on and running. I just am not understanding why it's doing it. everything is running and I just had...
it does but when I start the engine the battery light does not light up the way it should that is how I knew the alternator was not working.
I just had my alternator rebuilt and it has been working fine up until now. I am getting no output at all from it. Has anyone else experienced...
Thank you for the link It look very helpful I would not have known about the knob to pull off and look at the solder joints. I thank you very much...
Thank you for the information i was hoping it was not the rotary knob now I did to figure out how to take it apart and check the wires.
