© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Given initial costs, service/upkeep and likely future value, the 308 GTS QV is probably the better financial move. But, ultimately, you have to...
I think my biggest problem will be the volume of the air. I will see how the new blower motor does and hook it through a relay, so I'm not losing...
Thanks Sean! I tried turning that tank any way I could, but until I took the disc AND the Rt/Rear Shock out, i couldn't get it out. Oh well,...
Thanks for the tip guys. At this stage, easy enough to do. I just need to change out the oil on the compressor. No biggie. Sean, I was...
Jim, You will see on the picture of my compressor that I, too, used spacers between the york-to-sanden bracket and the compressor. The slots...
Thanks Sean! Google: Carr Auto Parts Houston. Not on Hempstead way anymore. He's in Porter closer to my side of town. His number is (281)...
Mark, I don't know if your can keep the "quattrovalvole" moniker. You might have to change it to "venti-quattrovalvole"!
Thanks for the feedback regarding Nick's radiator! I am chatting with him at the moment to see what we can do about some of my condenser fitment...
here are some shots of the "extra real-estate" I was referencing as to adding an additional blower motor, should I be required to go to plan B.......
I have thought about this a lot and have read a lot of people's experience with this as well as talked to quite a few people. I am not...
Actually, the belt will need to be shorter! The stock one is 925mm long. As you can see from the picture, just a bit too long. I ran some rope...
Yes. Hoses are coming out and being replaced front to back. After getting the right gas tank out, I was able to unthread the lines from the...
I got the new compressor mounted today. I just need to measure around the pulleys now to get a new fan belt. [ATTACH] [ATTACH]
You are correct. I am having the evaporator checked out this week for any problems. After some debating, I have elected to go with R-134 v. R-12...
Sean, To answer your question IRT the connections, Steve and I discussed making an aluminum tube that runs up the side from the bottom and goes...
I am sure he would be more than happy to send you the parts! I am doing most of the assembling myself. I'm also working with Nick (Forza) to see...
Sean, Thanks for the reminder. My only concern with going with both fans on is the extra current draw. If one fan is sufficient to keep...
I have been working with Steve Carr, of Carr Auto Parts in Houston. He specializes in AC components. I was going to just go with the 20 x 12",...
Thanks. I have read through it numerous times. Development of a finished "kit" seems to have stalled however. His working model seems like it...
Out with the old York compressor. And replacing the AC hoses, front to back. The new hoses will have both charging ports located at the front,...
