Search Results | FerrariChat
Buy

Search Results

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Search Again
Page 3 of 7
  1. dino_bob
    Post

    koni shocks rebuild kits

    http://www.ferrarichat.com/forum/308-328/446542-koni-shock-service.html
    Post by: dino_bob, Aug 12, 2014 in forum: 308/328
  2. dino_bob
    Post

    Thoughts on capturing suspension motion data or ?

    Most of my experience is from downhill mountainbikes, so I do not have data from car datalogging. There are many systems available for logging all...
    Post by: dino_bob, Jul 24, 2014 in forum: 308/328
  3. dino_bob
    Post

    Thoughts on capturing suspension motion data or ?

    I have built a system for suspension position data logging. It was primary built to be used on mountainbikes, but can easily be used on cars and...
    Post by: dino_bob, Jul 10, 2014 in forum: 308/328
  4. dino_bob
    Post

    Superformance "uprated" springs

    I recently mounted the uprated springs and adjusted the shocks (after a rebuild with oil change). This is what I wrote: "I changed the springs...
    Post by: dino_bob, May 29, 2014 in forum: 308/328
  5. dino_bob
    Post

    How is the trunk built up?

    Careful, that white insulation might contain asbestos. Use respiratory protection, gloves and preferably an overall that you can throw away. Wet...
    Post by: dino_bob, May 9, 2014 in forum: 308/328
  6. dino_bob
    Post

    Show us your...steering wheel

    Dino 308 Gt4 1975 [ATTACH]
    Post by: dino_bob, May 7, 2014 in forum: 308/328
  7. dino_bob
    Post

    Koni Shock Service

    Thanks guys. You have a good point 911308. As the Agip Oso 35 would have a slightly higher viscosity than the Agip Oso 32 that I found data on,...
    Post by: dino_bob, May 7, 2014 in forum: 308/328
  8. dino_bob
    Post

    Koni Shock Service

    Finished! [ATTACH] [ATTACH]
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  9. dino_bob
    Post

    Koni Shock Service

    Regarding oil, the owners manual and workshop manual says that 190ml Agip Oso 35 oil should be used. This is no longer available, but Agip Oso 32...
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  10. dino_bob
    Post

    Koni Shock Service

    After cleaning, with new type oil seal. [ATTACH]
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  11. dino_bob
    Post

    Koni Shock Service

    After cleaning, with the old oil seals. [ATTACH]
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  12. dino_bob
    Post

    Koni Shock Service

    Before. [ATTACH]
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  13. dino_bob
    Post

    Koni Shock Service

    I have a technical drawing of the oil seal holder if anyone should be interested. More pictures below. [ATTACH] [ATTACH] [ATTACH]
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  14. dino_bob
    Post

    Koni Shock Service

    The outer parts were sandblasted and spray painted. I used RAL 2002 Blutorange color. The oil seals were old, but still working. I could not...
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  15. dino_bob
    Post

    Koni Shock Service

    Before I took of the screws that holds the shims on the foot valve, I measured the visible lenght of the threads (so that I could mount it in the...
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  16. dino_bob
    Post

    Koni Shock Service

    I removed and cleaned all the parts. Note that some of the parts has to be mounted the right way (washers, springs etc.). Take notes and...
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  17. dino_bob
    Post

    Koni Shock Service

    I built a tool to remove the top cap/ seal holder. For pins i machined down the tip of two M6 bolts to 5mm. You might be able to use standard...
    Post by: dino_bob, May 6, 2014 in forum: 308/328
  18. dino_bob
    Thread

    Koni Shock Service

    I recently serviced my front Koni shocks. I thought I would share some of the information I gathered, as it was hard to find information regarding...
    Thread by: dino_bob, May 6, 2014, 20 replies, in forum: 308/328
  19. dino_bob
    Post

    308gt4 Barn Find - Starting Photo Archiving Today

    No need to apologize. This is great! Keep up the great work.
    Post by: dino_bob, Apr 7, 2014 in forum: 308/328
  20. dino_bob
    Post

    new Porsche 'classic' oil coming soon

    Interesting. Looks like they will also make a 10w -60 oil. Porsche Classic motor oil - Rennlist Discussion Forums At the moment I am also using...
    Post by: dino_bob, Mar 21, 2014 in forum: Technical Q&A
Showing results 41 to 60 of 133 Next >
Search Again
Page 3 of 7