© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
David, Spent most of the day today playing with the jetting to no avail. I ended up before I read your email back where I started yesterday,...
I have all those jets and will try them tomorrow. I tried 40 idles with 135 mains but this was worse than 45 with 125 mains. I put the 125 mains...
Russ, I will try the 55 idles tomorrow but they seem really large. I know that the 40's are too small as they had a bigger stumble than the...
Russ, did you ever go anywhere with this. I have a flat spot I am trying to tune out of my 76 dry sump with P6 cams. Just put in the F24 ET and...
Corsa 308 I think that we have exactly the same engine and similar problems. I have a 1976 dry sump 308 engine with Borgo high (er) comp...
I see that Dave Bryant (duck.co.za what does that mean anyway?) has asked that question twice with no thoughts from the board. I would like to...
Resurrected this thread from earlier this year. I have a 3 liter 2 valve 1976 dry sump engine that was rebuilt approx 2k miles and 5 yrs ago....
Thanx Paul I did spend some time researching the Porsche mirror "inventory" and mirrors in general. The problem is that most modern mirrors...
OK, Here are some more pics showing mounting holes, dimensions and the interior switch mounting/detail. The holes are pretty large, I admit...
Yeah, I know it is sacrilege to mount anything non Ferrari on a 308, especially from a 911, but in this case the mirrors really fit the car...
I took a chance and ordered a set of used 1985 911 flag style mirrors (motorized) from Oklahoma Foreign complete with wiring and switches etc for...
Newby dude I am very interested in this setup. This type of auto bleeder valve is a very common setup for forced hot water heating systems in...
While the wet sump tranny will fit on a dry sump engine, modification of the wet sump tranny is required- it is not a Dremel tool modification as...
I think that Mark is referring to the fact that by far the vast majority of 911's ever produced are in fact dry sump- from 1967? probably until...
Not to be argumentative, but you can fit the engine back in a 308 GTS with the bell housing fitted, it is a bit tight but with the right setup it...
There is indeed a pattern here. Stebro is not reliable. I am still waiting for my refund but I do have an ace in the hole (like snj5)- the...
I have actually fitted a drain to the bottom of the radiator and a fitting and drain to the block. In both cases I had to have a machinist...
Thanx for the posts and I have heard from Cavallo Nero on his Magnaflow. Only three questions remain- Do you need to have air injection to use...
Hello all, As hard as this is to believe Stebro again shipped me an exhaust that did not fit my car. This after I had removed and shipped them...
Copper squash washers? Do they go on both ends. I don't recall seeing any of these washers when I put mine back together. Of course mine leak...
