© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
McMaster Carr sell a high temp. spray on adhesive. Sorry I don't have the part number but you can go to their website and do a search.
Happy to report I started my 348 today with Kia crank position sensors with 860 ohms resistance vs. the original 550. The engine ran smooth, idles...
348Jeff, Thanks for the update, good news so far. I should start mine tomorrow. Will update you and appreciate one from you as well. Brewman
This is the link to the site where you can download the WSM. Follow the two step procedure for torqueing the heads or you'll most likely end up...
Again thanks for your clarification on the type of sensor (VR) used in this application. I guess to really understand the circuit operation we...
Learn something every day. I thought the pulse frequency would change based on speed of rotation and the amplitude would remain constant. So how...
Johnk, Agree pin 3 is the shield. You may be right re. the frequency although I don't believe the magnitude of the signal will change based on...
Guys, thanks for your input on this question. Post 13 particularly raises questions I had not thought of regarding the mapping. Plan to finish...
Josh, You are probably right as I tend to do that. Just my analytical nature coming out. Thanks for your input. Brewman
Jeff, Thanks for the offer. I would appreciate the info. I 'm away from the shop now so pulling from memory but believe you measure pins 1 to...
Do you know the resistance of the Kia sensor you used ? Thanks, Brewman
The 348 parts interchange thread lists a KIA crank angle sensor as a replacement. I ordered the KIA part and prior to installing measured the...
Agreed. Just went thru this on my 94 348. Make sure the shop you use tests the spring tension. The WSM has specs. for the amount of tension...
