© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I know we all get ripped off for parts but I am sure some are worse than others. This I feel was extortionate at £93 (around $170) for a...
Jeff, It IS the item you highhlighted that broke on my car. It just looked a poor drawing on the PARTLIST in comparison to the real thing...
Jeff, We are in the same place. Having stripped everything down, I have now started on the strakes. All bolts out bar 2 - they won't...
I do not have a digital camera but can advise that I 1. removed exhaust shields 2. remove air intake 3. removed rear bumper 4. remove full...
Anyone know how to get the door lock removed on a 348 door. I have all the interior panel/liner/window mechanisim etc removed and can see a...
I think you are going to have to remove the clutch pack from the rear of the car. It will be the seals on the T/O bearing assembly. While...
I've just gone through this pain for my 348TS LV were up 35% on last year. Eventually went with AON (circa £500) - same as LV last year....
When you say the sensors have been checked does this include the crank speed sensors. These are located just underneath and to the side of the...
Ooops - the previous edit didn't work very well !! Hope you can make out the gist of it
I have seen 3 cars now all 348TS why do some have a the bottom part of the sills/ bumpers black? i think these are the early ones as 1992 onwards...
Paul, Whatever you decide to buy, please ensure your maintain a fighting fund to keep it on the road. Think about the simple things that all...
Graham, No idea I shall wait and see what the paperwork says.
Well, I have now had verbal new quotes awaiting formal offers in the post. Ferrari 348 5000 miles p.a £510 ish - AON AON are not interested...
Just received my renewal quotes from Liverpool Victoria to find that both cars (944S2 & 348) have jumped by about 35%. Having discussed the...
Bill, to remove the 'grooved nut', once you have the clutch housing off and the correct tool as shown by 348PAUL, you will need access to an...
Anyone out there with a 348 that DOESN'T leak from the cam shaft seals I had mine done a year ago and it looks like they have started again !!!...
What a bummer... One reason why a use a trusted specialist rather than main dealers...
If the cost of these issues is factored into the purchase price then I do not see an issue. If you are getting the belts done as part of the...
Steve, if you want one fitted, you need to get a 3 " (75mm) horsey with the 2 studs. Its then a simple case of obtaining a small piece of...
Dave, just checked the WS manual Tension is adjusted by 'stretching' the spring in the tensioner and using a STAEGER tensionometer God...
