© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
by a "few grand" he means $10k-19k!!!! mine is in the shop sadly now as we speak (DCT issues)
very easy - got the part# from scuderiaparts.com - found on ebay for $250. Took door apart in 90mins. There are clips that pull apart and 3 screws...
Dale is great - he's working on my DCT gremlins right now! (june '24) - we think it's electronic, car seems to run fine until it "heats up". I'm...
update: today I got stuck on the side of the freeway - after testing the mid-day (no traffic) car ran fine. Coming home in bumper-2-bumper car...
I spoke too soon. Just failed on the drive home from work. In slow bumper to bumper traffic. Box will be getting dismantled. The valve shake was...
my 2011 has the oil cooler in the back! just like the 2012-2014!!!
Good news: GP autoworks ran a further test that my x431 Launch tool could not do, and was able to run an actuator / valve "shake" procedure for...
2011 had the heat exchanger moved to the rear behind the transmission - I saw this this morning when it was up on the rack!!! Same as the...
Everyone: I had the same issue 2 weeks ago on my '11 Cali. Driving then out of nowhere lost R,2,4,6. Few days later ran diagnostics on the "red...
Good news everyone: my car went in to see Dale this week (GP Autoworks, San Diego) - I also had the "Tranny" failure 2 weeks ago and lost R,2,4,6....
When panels came off he noticed the speed sensor had ALREADY been done! - he was able to recalibrate the entire system doing a "actuator"...
no my ferrari guy (ex dealer) indy is going to take it apart; the estimate is $5k - 19k depending if its "just" sensors, or just gaskets/seals, we...
49,400 getting towed tomorrow to the shop!!!
$19k max would be "worse " case scenario replacing everything! - will cross that bridge if I have to; as of now I plan on fixing EVERYTHING that...
towing to the shop end of this week; as of now we think its the pressure sensors, and bad gaskets/seals, and failed bearings. Should know more in...
i replaced the motor mounts AND transmission mounts 18 months ago when my "headers" blew - they had to remove the huge metal frame to get to the...
:(
sadly.. this statement is 100% true (i'm 3 years in... several thousands dollars gone) and that's before my DCT failure last week which is still...
2011 Cali - did more diagnostics over the weekend; ran pressure PSI test on even and odd gears and looked at all the parameters with my x431...
Thanks for the tip, for now supporting the local tech experts here in so-cal.
