© 2020 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
I sent you a PM, but no response yet. Are your pieces still available?
I think a good starting point for ride height is to set the front and rear, lower A-arms, parallel to the road. More specifically, inboard and...
I need to consider your recommendation.
I sent emails to both suppliers you recommended and have received responses from...
That's an aluminum panel IIRC. Mine was riveted on the edges and bonded to the tubing triangulation, probably to reduce vibration. I suspect this...
Thanks for the fast response. Yes, Superformance is one option. What do we know about this tubing? Anyone have experience with it?
My frame holding the rear, lower right side pickup, has damage from an earlier life. I want to repair it, probably by replacing an 8-20 inch...
Sticking advance weights in the distributor(s)?
Synch is most important at the lowest rpm and the lowest flow rates. A small air leak, makes a relatively bigger percentage increase in air...
Do you have tabulated output files for the sims you did for me? It's hard to compare results without putting the data on the same chart....
IIRC about 3k USD, for one ratio, plus shipping. I'll be going back for additional ratios after some road time. The one thing not...
Modena Engineering does a helical drop gear set for the 308 gearbox. I'm in the process of fitting one to my 328 gearbox at the moment.
We had a pretty good discussion on 308 exhausts here:...
I believe the following is the progression of crank strokes.
328 73 mm
355 77 mm
360 79 mm
I have a similar 8-cylinder manometer setup made from two, 4 cylinder Motion Pro manometers, that used to be marketed to the motorcycle...
That is the backup plan. The car won't go back on the road till the spring now, so I have a several month window. Other things still...
The drop gear kit manufacturer says give it a try.In reality, the cover is about one inch thicker than the 328 one, to accommodate the...
That's a great observation. Thank you. I got it wrong. Do you agree forces cancel when both helix angles are the same, like the single...
Does anybody know the tube OD's used on 348/355/360 exhaust systems?
Hi Johnny Law,
Mike Ham from Tubi sales, post 12 of this thread, says their collector is 2.13 inches OD, so bigger than the 2.00 inch OE...