Sign in
Forgot your password?
or Sign up
News

Search Results

Search Again
Page 1 of 10
  1. 348paul
    Post

    22mm Non-Marring Lug Socket Comparison

    The green one form Amazon is a Steel socket with a plastic outer. Steel sockets can cause a lot of problems with the chrome cracking that you...
    Post by: 348paul, May 15, 2019 in forum: Technical Q&A
  2. 348paul
    Post

    360/430 bleed block installation standard (new?)

    The clutch blocks Hill Engineering manufacture are from a far higher tensile strength aluminium than the original OEM parts and far lees...
    Post by: 348paul, May 12, 2018 in forum: Technical Q&A
  3. 348paul
    Post

    Replacing the motor/engine mounts on a 456M

    My 550 will be going in for its third set soon...!
    Post by: 348paul, Nov 17, 2016 in forum: 456/550/575
  4. 348paul
    Post

    Replacing the motor/engine mounts on a 456M

    My 550 will be going in for its third set soon...!
    Post by: 348paul, Nov 17, 2016 in forum: 456/550/575
  5. 348paul
    Post

    Chinese Infiltration?

    ...Even something as simple as spring washers...The last lot of factory #10569279 spring washers that we purchased were as soft as toffee! We...
    Post by: 348paul, Sep 17, 2016 in forum: Technical Q&A
  6. 348paul
    Post

    Chinese Infiltration?

    ...Even something as simple as spring washers...The last lot of factory #10569279 spring washers that we purchased were as soft as toffee! We...
    Post by: 348paul, Sep 17, 2016 in forum: Technical Q&A
  7. 348paul
    Post

    Chinese Infiltration?

    Its a minefield out there and Ferrari are making some pretty fundamental mistakes especially when it comes to o-rings. Measuring them is one thing...
    Post by: 348paul, Sep 17, 2016 in forum: Technical Q&A
  8. 348paul
    Post

    Chinese Infiltration?

    Its a minefield out there and Ferrari are making some pretty fundamental mistakes especially when it comes to o-rings. Measuring them is one thing...
    Post by: 348paul, Sep 17, 2016 in forum: Technical Q&A
  9. 348paul
    Post

    Triple seals: Viton

    Picture showing cross sectional view and just the one seal on the far right groove. http://www.hillengineering.co.uk/catalog/images/ph/1.JPG
    Post by: 348paul, Aug 11, 2016 in forum: 348/355
  10. 348paul
    Post

    Triple seals: Viton

    Picture showing cross sectional view and just the one seal on the far right groove. http://www.hillengineering.co.uk/catalog/images/ph/1.JPG
    Post by: 348paul, Aug 11, 2016 in forum: 348/355
  11. 348paul
    Post

    Triple seals: Viton

    On all the four shafts that we have, we found that there is no contact of the seals on the sides. All of the groove widths are within 50 microns...
    Post by: 348paul, Aug 11, 2016 in forum: 348/355
  12. 348paul
    Post

    Triple seals: Viton

    On all the four shafts that we have, we found that there is no contact of the seals on the sides. All of the groove widths are within 50 microns...
    Post by: 348paul, Aug 11, 2016 in forum: 348/355
  13. 348paul
    Post

    Best 275 4Cam Distributor Curve

    I have found that even a variation of 0.25 N/mm on the spring rating can throw the curve right off! (on the weaker longer spring).
    Post by: 348paul, Aug 10, 2016 in forum: Vintage (thru 365 GTC4)
  14. 348paul
    Post

    Best 275 4Cam Distributor Curve

    I have found that even a variation of 0.25 N/mm on the spring rating can throw the curve right off! (on the weaker longer spring).
    Post by: 348paul, Aug 10, 2016 in forum: Vintage (thru 365 GTC4)
  15. 348paul
    Post

    Triple seals: Viton

    On the OEM parts I found there is no contact of the inside diameter of the triple seal and the minor diameter of the groove of the shaft - about...
    Post by: 348paul, Aug 10, 2016 in forum: 348/355
  16. 348paul
    Post

    Triple seals: Viton

    On the OEM parts I found there is no contact of the inside diameter of the triple seal and the minor diameter of the groove of the shaft - about...
    Post by: 348paul, Aug 10, 2016 in forum: 348/355
  17. 348paul
    Post

    HELP: Later style clutch release bearing flange need to be replaced on 355

    Unfortunately the CRBF348/355 (#168589) can not be used as a replacement for the later #158209 flange. I have let Superformance know that the...
    Post by: 348paul, Jul 27, 2016 in forum: 348/355
  18. 348paul
    Post

    HELP: Later style clutch release bearing flange need to be replaced on 355

    Unfortunately the CRBF348/355 (#168589) can not be used as a replacement for the later #158209 flange. I have let Superformance know that the...
    Post by: 348paul, Jul 27, 2016 in forum: 348/355
  19. 348paul
    Post

    Motorsport.com acquiring majority of FerrariChat.com

    Who will be dealing with sponsorship on a day to day basis Rob?
    Post by: 348paul, Jul 18, 2016 in forum: Ferrari Discussion (not model specific)
  20. 348paul
    Post

    Motorsport.com acquiring majority of FerrariChat.com

    Who will be dealing with sponsorship on a day to day basis Rob?
    Post by: 348paul, Jul 18, 2016 in forum: Ferrari Discussion (not model specific)
Showing results 1 to 20 of 188 Next >
Search Again
Page 1 of 10