© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
Also isn't everything normally in Nm? i.e. 100 for F430?
Going 6 speed so if someone needs to buy a F1 pump relay let me know.
Any update on the Miller video?
Fobs come up every so often. The dumb thing is that people want to try and sell them for $1k used. At that point then a new key from a dealership...
Yeah you are missing the "pill" in the key head that talks to the immobilizer.
I also bought an uncut key head for a F430 but then also bought a...
Serviced the AC myself recently.
The MIC is a two wire black connector where I believe the wires are black and dark brown. While swapping my 6105 for a Becker Cascade I re-hooked...
Mike came over to my house and demoed his different setups. If really looking for bass I would go with his larger sub kit.
I went with his amp...
950.03003 is for the front as the caliper has hard-line that goes into the clipped end.
950.03501 is for the rear as the SS hose...
Thanks for bringing up this point. I was keeping my system with the "climate control" pushed out button set to OFF. My original confusion was that...
Heater started working prior to the recharge so must of just needed a power cycle. Charged up (750g) and nice AC coldness.
Unless the 997 is a convertible I would see you selling it.
I just put in a new drier and vacuumed out the system. I will report back after charging the AC. Other threads seem to point to a "hard reset" of...
Yeah that should work. Good idea, then could cover the protruding bolt (or AVK insert) shaft with epoxy. I should of done that.
The AVK insert is precisely what lived in the plastic before the "sleeve" around it cracks/crumbles. In my case there was really not enough...
A few mm. What I did was try and epoxy a small metric nut into the place after cleaning up the surface with a dremel. If I did it again I would...
Ah thanks. I have had the AC off since I need to re-charge it. I was wondering what was going on.
So they AC needs to be set to on for the heater to work?
If you ever go to swap your brake bulbs this post will often shatter and the screw will just spin w the threaded metal part.