© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
Those aren't the highest tensile bolts. I now use better ones and would torque those to 60 Nm.
And more importantly use Loctite.
So just take a...
Suppose this was a little naughty then!
Cheers and I'll send back a dual mass O ring in case you need to regrease any time.
Oil soaks in very quickly and easily and stays there.
It slips and causes the heat marks mentioned which is then a cycle of wear and damage.
When done can I have a set please!
The original dish on flywheel is negligible and was for ease of take up. A dish of those measurements will wear the friction plates unevenly....
a good preventative measure is replacing all the hoses with silicon at engine out. some are not very easily reachable.
The thicknesses i have are
Intermediate plate thickness 9.00
Friction plate Thickness at rest 7.25
Thickness under load 6.90
Those friction plates are totally shot. What thickness have you left?
I can't see any grooves in the pic at all.
You have set up height in the...
I used one recommended on here and sold on ebay. It needed a bit of sorting to form a gas tight fit but not a major job and so much cheaper. I'll...