© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
Well, sloppy as in they forgot to drill one of the holes on a panel (figured out after putting all the bolts in♂️
Other panel had gel coat...
Has anyone actually got a good looking, low weight engine panel in carbon fiber or louvres that don't scream "made in China"
R-tune seems to be...
Don't see the sense in replacing those 2 steel type screws. They are not aluminum like the ones holding the bearing.
The other two long ones,...
Try looking at the Pioneer Flip Out screens. They fit and its a much cleaner look with less buttons that match the interior.
European Coach Auto Repair
Short story, found these guys through google because they had a flawless review
Truth be told i'm always skeptical of...
How about you come down to San Diego area will meet for sure!
I highly recommend European Coach Auto Repair in the San diego Area. Amazing honest service, got the problem done fast. I wanted to do a bunch of...
Overall the project was a success and yes I did this for fun. More carbon fiber parts less weight overall. Yes 1 part may not make any difference...
So managed to get the carbon part off the original metal with some work. Cutting the edges straight has been a challenge. More work to do but I...
Started the carbon fiber battery tray. The tray had some nice weight to it and worth doing if your goal is weight reduction everywhere. Still...
Anyone changing their MAF with above, let us know if you experienced anything, i'm at 20K miles on the original, not sure if worth changing.
2001 Modena 6 Speed with past upgrades
Daytona manual seats
- Capristo Exhaust with Carbon Tips
- High flow Cats
- 19 / 20 Work Wheels
JB weld the tops, epoxy is not strong enough
360 will be slightly lighter
360 will have less electronics to fail
360 has a higher pitched tone which many prefer more than the F430
360 may be...
Anyone have the bolt sizes type and length used inside the 360?
The interior aluminum trim pieces
The trunk bolts holding the...
How many miles and was the gear oil changed every few years?
New Wheels going on!
:eek: I adjusted it today so it moves while the vehicle is running, is that a problem?
On the 360
The Idler Pulley on the main belt image shown
I can't figure out how much pressure it should put on the belt? Is this pulley supposed...
After much effort, I finally got the left bank belt on with the YELLOW marks matching.
Right bank timing belt I have not touched yet
What did I...