Weekly digest
© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
I agree with Privacy Policy
Hi, There is a used one listed for sale on eBay in Italy.
There is a 1972 246 GTS listed on Ferrari of Silicon Valley, not sure if it is still for sale because they only have pictures in the listing.
I would like to know if anyone encountered a problem with the inner sleeve being too tight for inserting the inner bushing. I was only able to...
It is listed in the link for EUR 219,000
Hi Mike, Thank you, I wasn't sure if I needed any outside support on the sleeve when pressing it back into the outer bushing. I used my press,...
Hi Mike, Just wanted to check with you, is there any special way that I will need to press the inner sleeve back into the outer bushing. I finally...
The information on Ferrari of Walnut Creek is in the previous postings. To my knowledge the maintenance records were not saved. You can contact...
Hi Kevin, Yes, I am looking for a 2 ton engine hoist and trying to determine their specifications. I did read through your post and I didn't...
Thank you very much. I was hoping that it would be somewhere around this weight, but it was only a guesstimate on my part. I have already removed...
Hi, I am trying to determine the weight of the 246 engine. I haven't been able to find any information with regard to the weight. I am thinking...
Yes, I have already removed all the inner sleeves, and I have purchased replacements.
Does the wishbone outer bushing need to have the yellow zinc applied again. Has anyone done that.[ATTACH]
There should be a part number on the diverter valve. It is usually cast into the area surrounding where the diverter hose connects, looking...
Hi, I was looking at the picture of the tool kit and jack in the Spare Parts Catalogue for the M series and it shows a lug wrench with a 90 degree...
Ok, that is what I thought. Thank you.
Thank you, I am planning on using OEM inner bushings.
I am considering powder coating the control arms, but I would like to know if the suspension outer bush (4) needs to be removed prior to powder...
Thank you, I did a search and I didn't find anything related to the outer control arm component replacement. I was thinking of replacing the...
You might want to open your own thread. Thanks, Russ
Hi, I am going to be replacing all my bushings on 85 308 QV and would like to know what needs to be replaced on the rear outer bushings. Do I need...
