© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
You might also find these images of my LHD rack helpful for comparison.
You could try this company. They rebuilt the rack on my LHD 246gt. They are very helpful.
Can anyone let me know where I can source the below for an M series door lock?
[ATTACH] [ATTACH] [ATTACH]
Thank you Matthias, I am making one out of 2mm sheet. I think that should be sufficient.
also thanks to the other f chatters who took the trouble...
Thanks for the replies guys. Much appreciated.
I am going to make out of 2mm sheet. was concerned in case that was too thin.
Can anyone tell me the thickness of the fiberglass undertray on M series please.
I need to make a new one and the old one got left by the side of...
Thanks for the advice guys. Always helpfull as usual.
Will get stuck in and if any of the suspension needs to be removed so be it.
Looking to remove the fuel tanks on my M series to give them a good clean out.
Any advice on removal would be most welcome. Do I need to remove...
Hi Andrew, I just striped my distributor down and used a windscreen wiper puller bought from eBay for around £6 to remove the upper bearing.
Dino Christmas for me this morning.
Merry Christmas and a happy new year to all Dino lovers out there [ATTACH]
Superformance steering hub extension is at the link below. 2 sizes available.
Under the servo cover now. Discovered there is no return spring on the clutch pedal
And the rubber bump stop on the...
Trying to adjust my clutch and was wondering if the clutch pedal hight should be the same as the brake pedal.
Currently it sits higher.
Thanks Rob, I will check the advance as suggested. I am going to do Adrian’s Dinoplex conversion soon so will rebuild the distributor then if...
Thanks for the swift response Rob.
Car is running. Have traced the path of number 3 terminal, rotor arm is pointing at the 4 o’clock position....