© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
okay, i just could not see them from the header pics.
so no error codes at all, no reprogramming of an ecu?
where do you connect the 8 lambda sensors and 2 thermocouples to FABIO headers on 575?
We stood in line for nearly 3 hours for first shot earlier this month. No issues, just sore shoulder.
Next shot in early March. They will start...
well it turns out that TDC mark on repaired pulley is not quite correct, I checked with a dial indicator for piston TDC, a couple mm less than it...
i did euro version from Scud Ing.
i replaced all mine with plug and play
car back on road.
~ $700 to repair vibration damper
~ $500 for new pulleys, timing belts, aux belts
I am glad I was 50 yards from home when it...
Can they look and find out which focal speakers?
crank pulley repaired, ready to go on
I wanted to check TDC with the Hill tool with the intake manifold in place and that cannot be done so I got a 100mm extension for the dial caliper...
yes apx5 front and rear in 2002 575
I did not change tweeter as one must remove the dash to replace tweeter.
I tried focal K2 but their depth is...
audison APX-5 work but focal do not fit in the rear spots
I would suggest taking it to an audio shop that has worked on a Ferrari
I added the...
so I did lock and swap, turned crank a few times and everything lines up like when I degreed the cams last time. Sometimes the hardest thing to...
8290 Alpine Avenue Sacramento, CA
He has a lot charge, so send all you can and get a...
got parts back from cad plater, he was fast
After further review, my assessment is the vibration damper pulley failed and started to move forward, snapped the ac belt and then impacted on...
So I took of timing belt covers, and checked the belts. Timing is still dead on with the marks I put on 3 years ago. But the belts look like...
The tension pulleys are shot. No affect on unit pulleys.
The guy that did my XK8 HB has done Ferrari 550 before and can do mine. I just need to...
There was some oil on the crank bolt washer and the mating surface in the HB. Is that normal?