© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
Mine is an 83, QV. It only has one shield on the left side.
I pulled this off of a euro 308 that I am restoring. Would accept almost any offer.
I have a NOS liner for a QV if that will work for you. Contact me for further detail.
Yes, the other motor is a big Healey that I am restoring for a customer.
The floor tiles are actually painted on the floor. I simply made a...
The previous owner started a timing belt replacement (I presume), tore the top of the motor apart and then the car sat in this condition for about...
I've been a lurker on this thread for several years. Thought I would share some shots of my euro, QV motor as it nears completion. Stock spec...
Here is the test tube I have. It has been sitting on a shelf for years.
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
I have a test pipe which I purchased on ebay and actually used it for testing on a 328. It only has about 50 miles on it. If this is what you...
I am rebuilding a euro, 308 QV. I am in need of a complete exhaust system for this car. It looks like this may fit.
Contact me to discuss...
Has anyone tried the Cometic head gaskets for a a 308/328? I have had good results with these gaskets on other cars and have been trying to make...
I have not worked with a 208 motor but what you describe sounds like you may have to bring the piston up, remove the wrist pin, and then pull the...
I purchased a windscreen from Ferrparts on eBay last winter for a euro, 83, 308, QV. It dropped in with no problems. I recommend you check and...
I could use your take offs if they are in reasonable/repaintable condition.
Any reason not to just bore the original liners to 83mm with new nicosil? Is 85mm safe?
After scouring the planet for one, euro-spec 9.2, piston, I have come to the conclusion that I may as well replace the set with modern pistons and...
I have one. Let me know the year of your car and other particulars about the tach housing you need.
With the current state of pump gas, I am hesitant to go with a compression ratio higher than the 9.2 for street use. Have you don't this with...
I checked with Eurospares and with Superformance. No one has a 9.2 Mahle piston. I may have to buy a full, new set of pistons.
Thanks! I will follow up on this.