© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Here is a picture of Cody's Enzo published on The Lowrider Magazine. Does not look like his car. [ATTACH]
Peter, you have PM.
Peter, I live nearby Cortez, I'm not an expert for a PPI, but if you need someone to go take a look at the car before you close the deal, just...
Dave, you have a private message. Regards, Milton
Hi Brian, just got home. My dwell meter has a scale from 0 to 45 degrees. When I was testing the duty cycle, my meter was showing 35...
Vern and Brian, thank you for your assistance. Please accept my apologies for totally forgetting to state the car model (87/328) in my post....
I finally got around to try my LM-1, but have one problem. There is no room to install/weld the supplied exhaust bung. All I'm trying to do is...
Well folks, thank you so much for all your help. Problem is solved. Before going to church, I decided to take a quick look at the light...
Hi Chris and DGS, thank for your help. I have determined that the fuse blows when I rotate the stalk at the steering column to the parking...
Chris, just measured the resistance between the 3rd terminal on connector J (yellow with red stripe wire) and ground, it reads 0.4 ohms....
Thanks Chris, I'll check that out as soon as I get back home today. But, after reading your post, I think I am checking the continuity beetwen...
All the dash lights on my 328 are not working, the instrument cluster (speedo/tach) and at the 3 gauges on the center of the dash. Everything...
Steve, Please send a PM with your email, and I will get in touch with you. I just send email to all NM owners, with a proposed Charter for...
Just got a reply to the email I sent to to the seller, here are the answers: 1. When was the last major service performed on the car? I...
Does anyone has any info on this car? Your opinions, please? Thanks. Milton...
Let me start this by stating that I am NOT a physician, but I have dealt with this problem (with a family member) for many years. PAXIL is an...
Thank you all for the kind words. It's been a learning experience. Our next get together will be this coming Sunday (12/11) in Albuquerque,...
Ron, you have a PM. Milton
The reason I was asking, is because I am organizing the FCA Chapter for NM, and would like to invite those close to NM to participate. Regards,...
Daniel, I sent an email to you, but not sure you are receiving it. I have several of my clients websites, being hosted by www.powweb.com...
