© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Sorry to get off topic. My 81 parts book shows the sender mounted on the bottom. My 81 has the speed sender mounted on the top. The difference is...
My owners manual on page 59 Carry out this operation with a warm engine just after stopping; in this way radiator oil does not discharge into the...
I undestood what GeoMetry is saying there are 2 stickers on each cover. One is the description ( both covers match the description in your owners...
Thin or thick, if you don't have enough ZDDP flat tappet engines are eating their cams! Stephen
First I would try to get the right hose. If thicker washers fail, then you could extend the thread with a die (if you are running out of thread...
I am planning on putting a REAR SPOILER on my 308 GTSi and would like a Picture of the access to the mounting studs. I know I will have to drill...
At last got a 180mph Speedo for 81 308. Got 2 of the 4 lights out (Hazard and Battery) and can't see the screws. Have not unpluged the lights...
Just make sure you don't use the middle of crossmembers or you risk tweaking the frame. Notice on the diagram all of the jack points are where...
When I was researching my 1981 308 GTSi in 2005 all Car Fax showed was the current owner which according to him was the 4th, he had the documents...
Ditto for 14's, Pilot for 16's. Stephen
I was watching 2 Guys Garage and saw CounterAct Corrosion Protection checked their website and the price was a little high. Checked eBay and it...
My 81 GTSi locks won't unlock with the key in either door. They lock with the key and unlock with with the plunger(knob). I used to think it was...
You might want to get Verell's cam clamp. I know you believe 1 has slipped, Verell's camp is marked so that you can do a quick check if your ki...
B4 replacing the sending unit, I would clean the connector at the unit. At the very least use contact cleaner, I dissassembled the fittings,...
Check this out. Now that Jean Todt is gone Peter Windsor lets it all hang out....
When I bought my 81 GTSi, in 2005 an incident driving home ( tire failure on another vehicle ) inspired me to replace the 24 year old tires. I...
Looks like somebody realizes the problem. Has anybody tried it?...
Don't know if this is a repost, but if it is, it is worth repeating. http://www.youtube.com/watch?v=xTKj6F_Qq1U Stephen
Just look at a Birdman post and click on the Fuseblock link on the text at the bottom of his post. He is great to work with. Stephen
