© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Very cool, thanks for the tip -- will contact them. As a side note -- never realized these are the same on the Miura, shows how little I know.
Here are two recent shots. Front end almost wrapped up. [ATTACH] [ATTACH]
Very cool
I.e. how do you restore these? [ATTACH]
Here's a question for the group -- how do you guys restore the air box covers, since they have original print on them? They are white(ish) on my...
Wow guys I didn't realize this would generate so many responses...here's the situation to see why this was puzzling and worth the 30 seconds to...
Can those of you with experience comment on the cosmetics of this engine? We followed everything that we found re: the LP400S S2 restoration...
I think I covered these bases... So if I use a tiny screwdriver (carefully) and push in the valve center the valve will let out air. Air...
Storing a vehicle for the winter, trying to pressurize the tires; they are at around 24 psi now with the 30 deg weather. However, the tire...
Since I was politely nudged out of the other threads, I guess I'll start my own :-) Restoring a CT LP400S S2 vehicle. Some tid-bits and pain...
Mine just came back from being plated, here's the (hopefully?) correct look. Clear cad plated, they appear shiny in the picture but it's not a...
Yes that's the system I was looking at, for $55 it doesn't hurt to try.
We tried re-plating the original Marelli coils as well as two Bosch coils and the results were a failure, basically inconsistent and uneven...
Can you advise on how you can get the silver aluminium Bosh coil to turn the plated yellow color? I can tell you that trying to plate them as a...
Joe, are you sure about this? Here's a picture of my originals, never refinished (one owner car). [ATTACH]
Joe, are these the correct bolts? The heads seem a little long compared to the ones I have and which I believe are original to the S2 I have but...
I haven't re-done mine but Re-did the spare wheel and found that there is magnesium pitting behind the paint. Maybe Joe can clarify - it looks...
Chris are you re-doing the wheels on the car?
The resistor restoration is not a big deal and information can be found on it easily. I found the best color match is a RAL Red Oxide paint....
Here's one challenge - how to get back to this look with modern coil performance? [ATTACH]
