© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks for all suggestions
Thanku
You actually driven at speed a 355? You actually know what you're talking about? You saying Ferrari don't know how to secure an engine and...
I have a very small drip coming from the end of a silicone water hose on my 355....it's the hose that connects from the engine to the underside of...
Yes you did Why does the handbook state 2 litres?
Nipple corrosion? What???
Well i tightened down the clamp with an 8mm (may have been 10mm..cant remember) socket real tight whilst engine warm The hose is slightly bulging...
I always check 355 oil level after long hard drive with motor idling. Fact is the handbook gives wrong info Difference between min and max on...
So my 355 had the oil level right on the minimum line Measured after long run with hot oil and car idling Handbook said 2 litres needed to...
Nah Car is lost in black
Nice catch The repair shop should never have mounted that clamp worm screw in a position to wear away the fuel line. They should have known...
Good video My 1995 M2.7 has 2 fuel pumps/filters so does not have the distribution block. I think it's a better system Why did the 5.2's go to a...
Hmmm.. You saying they supplied me with the wrong diameter hose costing me berllions of usd? And now i'm getting grief over my throttle...
Will have to empty the expansion tank to take the hose off....or there's gonna be coolant pouring out .... What is the best way to do that?
Hi It is hose part number 160416 From the bottom of the tank nearer the oil filter not the smaller diameter hose also on the bottom of the...
I have recently put a set of scuderia rampante silicon coolant hoses on my 355. All is great except i have a very small drip from the hose that...
"correct decals" You sure about that?
Very good info Have to think about it
Please PM me if you are looking for one of these rare items.
Brian What do you think of the MD replacement flywheel?