© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
If I were to go to all the trouble to purge the system properly, put in a new compressor and dryer but keep the OLD pressure switch and finally...
I have one. It is not magnesium. Its aluminum alloy but looks virtually identical to OEM Side by side, you couldn't tell them apart. I would...
I thought all 355's came stock with R134a??
By the way, what does the pressure switch at the dryer do and how would I know if mine is bad?
"Any dryer suitable for R134a would work fine if it has the required in/out connections." Is a dryer something that is more or less universal...
It leaks oil and refrigerant and is 20 years old.
Does anyone know if there is a quality aftermarket AC dehydrator filter (dryer) available in lieu of the OEM one Ferrari sells available through...
I need to make a small correction, add a caution and make 2 acknowledgements. First, let me say thanks to both johnk and Daverocks for their...
Here's my final update on the dash and console lights. Instrument cowl lights: 1) Tachometer - Replaced the three (3) OEM 1.2W with three...
Try GAHH in California. I bought one of their leather top boots for my 355 Spider and was very pleased with the quality and perfect fit. GAHH...
If you calculate the total pressure on a 3" cap, you get between 3.5 and 5.3 pounds, higher than you might have thought. That's enough to make it...
Here's an update on the dash and instrument lights. I put the OEM incandescent bulbs with the OEM green socks back in my car, (3) 1.2W in the...
PS. Got a radio �� Bob, Great, congrats!! Let me know how it goes when you put it in. Still waiting on mine.
Bob, When you use the term "sdecu", what does the sd stand for? Is this for the thermocouples? Correct me if I'm wrong but my understanding...
I have a 1996 Spider and have had OEM cats for a while, a resonator type test pipe and currently Fabspeed straight test pipes on my car. In all...
I have their original 90 degree bent pipe spacers for the secondary O2's and they work great. They fit either test pipes or cats. I've had them...
My question is: can I take that apart without interfering with the actual odometer mechanics or anything else getting upset? I'm talking about the...
+1 IMHO, we don't need guys like that. That's not what this forum is about.
I understand Dave. For a race car, MB appears to be a better choice for obvious reasons. But a street car driven for pleasure is very different...
I believe this is what Dave Helms recommended for street cars in a thread a few years ago. Accordingly, that's what is in my heads too. In that...
