© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks for all the great suggestions for these fittings. I can't believe I didn't think of the bleeder screw idea. I have some 6mm bleeders at...
I'm getting ready to check the sync of the carbs on a C4. I have my Carbtune gauges, but I need the fittings for the manifolds. I pulled one of...
Thanks for all the great info. I do believe my car has the original relay(unless the 308 ones were fused as well), because it has 5 terminals,...
I have a US spec 84 308 qv with a poor running problem (rough idle, poor throttle response, subtle popping in the intake at low rpm). I read...
Just got my stickers, the matte silver poly ones, and they look perfect. The old label came off very easily, and after a little cleaning, the new...
Is anyone looking into making a batch of these? If so, put me down for one. It's the one detracting feature of my engine compartment, not to...
I was able test the CSI today, hoping that was the issue, but all seems OK. When I removed the injector after driving the car, the end was dry....
Thanks for the reply Steve. That is a very good thought on checking the CSI. I will try that next chance I get. As for the consistency of the...
I'm glad to find this thread, because I have an issue along the same lines. I have an 84 QV that runs perfectly, except it has the hot start...
Thanks for all the help. I will check the pedal, and surrounding linkage, to make sure they are well lubed. It does seem that the "stick" is...
I have had my 95 GTS for about a month now, and I'm trying to track down what I think is a problem. When driving the car, it is very difficult to...
