© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I'm not sure if posting a link to a free manual download would be acceptable on this forum. However, if you're on Google and search: "Testarossa...
I found an in depth shop manual for the TR. It was online as a free download.
I'm searching for an in depth shop manual for a USA version '91 TR that includes specs for the cylinders, rod bearings, torque specifications as...
My TR was producing a sound that was similar to your description and it was indeed the throw-out bearing. It was very noisy when engaging 1st...
Both of my TR window motors were rusted and frozen. I took them apart, cleaned them, and oiled the bearings. You can get carried away and take it...
I agree improperly clamped boots are probably the more common cause of seal failure. I've seen one where the boot would spin around the shaft with...
Can you be specific about the "non existent" problem? Are you saying that rubber does not distort/compress when pressure is applied while being...
When your insurance company is not in compliance with your requirements it's time to search for competitive quotes. I'm sure they'll be quite...
If your 930 CV joints have not been assembled I would recommend packing them with synthetic grease. Before installing them I also recommend...
The CV boots on F1 cars are not designed for high miles. F1 cars have just about every part rebuilt or replaced between competitive races. They...
At 47K miles on my TR I replaced the CV boots and cleaned the bearings as a preventative measure. The boots had signs of age and to my surprise...
I "repaired" a major valve cover oil leak on my TR using high temperature silicone back in 2011. So far the patch work is holding up after three...
Thanks for correcting my error. I was not aware of the differences.
1991 Ferrari Testarossa for Sale | ClassicCars.com | CC-584861 This '91 Testarossa is being offered at auction with just 9,077 miles on the...
I lost count of how many times I had to re-fiberglass and re-paint the front spoiler. Frustrated, I resorted to a very drastic solution. I...
I had a '72 VW van and a rock punched a one inch hole in the crank case. I made an aluminum patch and gasket. I drilled some holes and placed the...
For now I'm content with using the silicone patch. The original leak had occured with about 2K miles on the gaskets after a major service at the...
Hi John, so far the silicone patch on the oil leak is holding well. I have driven about 8K miles since the repair back in 2011 and not a drop of...
This will add another $30K to TR values.
In addition to the kill switch reducing a very small risk of fire, it can also serve as an added theft deterrent for those unfamiliar with the...
