© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I used a socket a little smaller than the plunger diameter with a large G clamp. IIRC, I placed the circlip ready prior to positioning the socket....
Try putting the roof back up and latching closed then try the windows. Some logic in window opening could have been lost and requires resetting...
I realise this is an old thread and thought others may be interested in the subject. The OP seems to be a regular visitor here and will...
Hi, great idea and your Youtube video makes the operation very convenient. I am interested in this remote control installation. What remote was...
Thanks Jeff, I had seen that but so far not enquired. I fancy using all new parts for the repair. I have had a look at some used items from...
Thanks Jeff you have made me think of another option. The 65402500 could be an option, I will ask our UK colleagues for better pictures of an F1...
Does anyone have a picture of the inside of a Canadian spec bumper they could post that shows the mounting points to the car? Or even a picture...
Does anyone have a picture of the inside of a Canadian spec bumper they could post that shows the mounting points to the car?
Apologies gents for repeating the thread I posted in the 355 section but reposted here in the hope of some help. I am looking for a little help...
I am looking for a little help regarding the identification between the following two parts as shown in TAV 104 Item 4: Bumper support trestle...
No access from the front compartment. You will see from the attached picture the visible wire going to the windscreen and the little black box....
No need to remove the shifter rod to change the seal. Drill a small hole in the seal of sufficient size to screw in a self tapping screw. With...
Yes they will fit but they are not right for the reasons I stated above. Perhaps just me being fussy.
That is not the same plug as OEM. The OEM pins (and the replacements in the GCK) have two locking ears that fit into a lock either side of the...
I found Plast-dip primer used first makes a big difference to the adherence of the top coat. I also find mixing from the can with Plast-dip...
Bob I used these two products. The deoxidiser is slightly acidic so removes stubborn ground in stains. Quite easy to use via a stiff brush. The...
How about some detail [ATTACH]
and one from the top [ATTACH]
Sorry Bob, couldn't resist. Just another one of those DIY people who work very slowly and take more time (too much) to do anything. Great post...
or like this [ATTACH]