© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Okay...so I got some brake line and bench bled the master cylinder in the car. Then I removed the speed bleeders and back bled the calipers. And...
The calipers were off the car for awhile so there wasn't much fluid in the master cylinder. I'm guessing when I went to bleed the rear brakes the...
I saw this in Birdman's write up on rebuilding the master cylinder. I am going to check to make sure the shuttle valve is positioned correctly.
I just installed my rebuilt calipers from PMB Performance and new brake lines on my 1979 308. I began the process of bleeding the brakes and the...
I just finished replacing all the fuel and vent lines on my 1979 308. I used the SRI kit for the crossovers and fuel fill. In addition I also used...
Just replaced mine on my 1979 GTS. Used NAPA part #51212. More expensive at $107 though. Make sure you replace the one way valves also so you...
The wheels are 16" Etoile wheels that were put on the car in the early '80's. I will post some better pictures also. Thanks!
I recently purchased a 1979 308 GTS. Currently I am preparing it for the dreaded emissions test including re-jetting the carbs for altitude and...
