© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
It has the rare factory door pocket covers!!!!!
Do you have to balance the new flywheel to match the old one?
Truly awesome!
This may be worth a look. AC condenser made in Arizona. Can't post the link here for some reason but I PM'd it you.
Is it possible to safeguard the ammeter with a fusible link?
That Lancia plate is the one I remember. I will have to ask Popper about it. Seems the more likely thing for the racing team to do for so few...
Yes, the two studs. I was thinking about my Mercedes!
The rotors are a tight fit on the hub. Remove the countersunk screw and beat alternating sides with a rubber or plastic hammer and it should...
I think the 4-valve setup originated with the Ferrari Tasman engine. They had "Ferrari" on the cam covers. Mine say "Dino 246" and the racing...
I wouldn't have thought brown would be a good color on a Dino until I saw a Marrone coupe somewhere in Italy. It totally changed my mind.
I had a couple of original cans of Salchi Verdi Medio. We opened one up and did a test spray and it was fairly decent except there were a few...
There are some Dino replica makers out there that do a reasonably close job of it. Then you could sell off your project Dino, preserving an...
I think someone has mentioned bypassing the rheostat so the bulbs always get full voltage. I have used this style on some of my cars:...
My original plug is 1-5/8"/41mm with the thin leather in place. Look for dished core plugs like this: https://www.ebay.com/itm/191777956449....
Would these work? https://www.amazon.com/gp/product/B0C3C12RV5/ref=ox_sc_act_title_1?smid=A3KNBON8QEN6GR&th=1
Dennis McCann (now Tom Vail's) had a lot of 246 engines and transaxles. Might be worth checking with them: https://www.allferrariparts.com/
Those screw holes in the lens are notorious for cracking. I put a small o-ring or x-ring behind the screw head and just snug them.
Seems these might work if you adjust them a bit with a lathe. https://www.aliexpress.com/i/2251832675872635.html?gatewayAdapt=4itemAdapt
I mine say BOM on my '74 GTS. Maybe Hella on the earlier cars.
Not sure about the Dinos but I have seen festoon bulbs where the glass is actually green. I wanted a LED filament style festoon bulb which I...