© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Yesterday took the bumper off the gt4 for painting, wasn't too difficult. Maybe I could have taken the bumper off the hydraulic cylinders instead...
Screws might be 50 - 75 cents each, but minimum buy is 25. Washers $70 for 100. So a couple screw sizes plus washers and you're over $100....
Here's a Wix teardown: https://youtu.be/3mnAeiip3QQ No standpipe. No standpipe in the cutaway diagram above either. Some words in the...
Thanks for the input on the door panel screws. Discovered to my surprise only my driver side was missing all the screws. Removing the screws...
Maybe this is cheating, I replied over in 206/246 also: Need slotted oval head, about 5 of the 2.9 x 19 1 of the 2.9 x 13, and matching...
Need slotted oval head, about 5 of the 2.9 x 19 1 of the 2.9 x 13, and matching washers. Maybe 3 of the 3.5 x 19, 2 of the 3.5 x 13, in case...
Assuming Al is interested in making more, what was the price on this ? Also have a fuzzy recollection Superformance repops these ? Thanks, GF
Somewhat intrigued by this idea, I followed the link and found this price today: 1.309,00 Wondering how much that is in dollars, and what...
Taking the dash out didn't take the filter off the market, it's still shown as a cross reference to the Ferrari part number on the Fram site. The...
Kinda late to this party. I think I bought a set of six-spoke wheels from this Al character, he seemed pretty eccentric on the phone. In a good...
Like I said I lost all the little screws and washers that hold the lower edge of the door panel in place. Probably put them all in a "safe"...
Found they still have "pre-Titanium" Castrol Syntec 5W-50 at a nearby AutoZone. Has the magic words "classic cars" on the front and "flat tappet...
Well, maybe not exactly the same problem since I had to take the door panel off the opposite side door, study the mechanism, to get the problem...
@Brian, There's no bypass in the UFI 308 filter, nor in the Fram 2804-1. I am puzzled by this since there's no bypass on the filter mount like...
I'm only aware of the table showing different properties, zinc and phosphorus for the Mobil 1 product line. A similar table for the current other...
Been using the Syntec 5W-50 for years, from before the zinc controversy. Suddenly am aware it's no longer made. On eBay I can probably find...
I use the head end of a finishing nail to pry open the anti-drainback valve, fill the oil filter to the top, then quickly flip it into place and...
Not sure I see what among this sellers offerings is applicable. Looks like the car uses mostly 0332014113 plus a few 0332204101. Also on...
Had my windows quit, 308gt4. Determined I could solve the problem by swapping the 0332014113 relay with another one, used the seat belt buzzer...
That`s the main difference I see, the spokes are solid on the stock wheel. Kinda leery about pounding any steering column with a hammer,...
