© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
The Coils for CDI Ignitions are more "transformers" than an ignition coil. They have low resistance. You can try the MSD Blaster coil, I think...
This cable from Porsche 911 fits to the Bosch distributor, so you do not need to cut the original cable: https://www.ebay.de/itm/163646251981
The center disc is made, so that Offset is the same like Khamsin Campagnolos [ATTACH] [ATTACH] [ATTACH]
Hello Ivan, the MSD 6A Box works is good, The inductive trigger input of MSD works with the trigger in the Bosch distributor. The Khamsin tacho...
Nice to see photos of my car in Spa. I was there together with my son. We took part in the Parade, it was big fun. My Wheels: Yes, they are...
Ivan, I used this tool. 44mm ? To center it, I took a piece of a screw M14*1,23 and made a center hole in 6mm diameter = drill diameter of the...
Hello Richard first picture: no idea 2. and 3: covers the fuel hose between 2 tanks in luggage compartment [ATTACH]
Hello Ivan, I had the same problem. I drillel / cut the hole bigger: about 40mm diameter and made a round plate from aluminium for the M14*1,25...
Hello, you can use the oil pressure sending unit of the Fiat 124, but yiu need an adapter from Maserati: M12 ( *1,25mm ? not shure) to Fiat: M14...
Hello Ivan, my was also broken. I bought one of an older Mercedes which looked similar: see pictures The "tongue" of the Khamsins belt is a...
Mousehair Material: HVL Exclusive Interiors: [email protected] Rubber profiles: Cicognani [email protected] Lever frame for trunk...
I made reproduction of the headrest adjuster cover, see pictures: They are pressed in steel and powder coated in plastic look contact me, if...
Ivan, please let me know, if you got the files. Your webpage helped me a lot for my Khamsin restoration... So may be you can add them and these...
Hello Ivan, I made wiring diagrams with original colours, separated in several fuse circuits, I allready tried to upload the in this chat, but the...
The levers are From Fiat X1/9, the frame made in plastic is the problem, it is available in cast alluminium instead of plastic. Search for Fiat...
Hello Mike, Sorry for late answer: here a few pictures. It is common to change valve seals in the car, for example older VW engines had problems...
Hello Marek, thanks for your info. In the meantime, I think I found the problem and installed new valve shaft seals. With help of a special tool,...
Hello Serge I can not say that the steering hardener is generally a week point, I have only my Khamsin. I bought my car as restoration project,...
Ivan, yo you can test the pump, according to the manual from Citroen ( see my photo) I bought an hand-hydraulic pump and filled the tank with...
