© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Not sure why my car seems so much better with slightly lower pressure, it has had some weight reduction, and has Forza coilovers. But the...
Just curious- I know there are several people on here with 17" compomotive wheels on 308's. What tire pressures have you settled on? With the very...
This may sound like a silly question, but I'm trying to quickly figure out what type nut goes up against the outer tie rod to lock the adjustment...
I'm about at the point where I am ready to remove the AC condenser, AC is pretty poor, but there is no point in addressing it, as there is no way...
Wow- 35-40, that's quite a drop. Not a 308 is it? Ambient was about 80F, 160F thermostat,no AC, mainly distilled w some water wetter and maybe...
Anyone ever measured the temp drop across a Ferrari radiator from inlet to outlet? I used an IR gun on my 308 QV and got around a 20-25 degree...
I'm in ky, a little too far away. Thanks for the generous offer though!
Awesome! You can see that a lot of it is fiberglass too.
I love reading about oil. I always read the oil threads.I love oil, and a lot of other car fanatics do too. Every car forum always has a group...
Hmmmmm- that's kind of what I was thinking, that they should be pretty common stuff. This is the only place around that I would even consider...
I want to get my 308 QV in for an alignment, but the local shop who I trust to do it, does not have the camber shims. They said they can do it, if...
I've had my 84 308 QV for 1 year and 11 days as of today. Had 47,000 when I bought it, and 50,350 as of today. 600 of those were the trip home...
No, they are about 300lbs, much stiffer than stock. Compressing them does make a big difference, I can feel it. When I cranked them up in the pic...
Maybe "bump steer" isn't the correct terminology for my problem- maybe "steering kickback" would describe it better. Basically, when going...
Any links to watch this now that it's over? Didn't have a chance to catch it earlier.
I raised up the threaded collar about an 1" on each side to raise the ride height and see if that helped. The pieces still are touching at full...
Ride height is normal- the PO put adjustable shocks on because it raised up due to weight loss. Here's the current height- looks fine. [ATTACH]
Not sure- where are the bump stops? I'll check.
I was thinking the total length on the bar, but it's probably the stock one. Here's a few more pics, hard to get that exact angle, the spoiler has...