© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Julian Having had a closer look at your first and second photo's I'm now thinking that the triangular strip on the door might just be the pad...
Thanks for the photo's Julian but as you say you have them missing too. Can you confirm you have a hole in the 'A' pillar opposite the metal strap...
Guys, a little help if you can. My Ghibli has been in bits for 12 years and I'm struggling to remember what the mechanism is for preventing the...
As Ibird says if you cut a thread into the shank of a grade 10.9 bolt you will get a less than perfect thread, its very tough especially the...
Ibird, another option for you: 11 X 1 METRIC Chad
This thread (pun intended) has jogged my memory and I now remember obtaining these bolts 8 or 9 years ago when a good friend of mine Richard went...
Ibird Have you measured the tooth pitch on the one bolt you have or are you assuming the Maserati manual is correct? If I can find mine I'll...
Hi Ibird I thought the callipers on a Mexico were essentially the same Girling items used on the Ghibli. I thought they were 7/16" UNF which...
That's the way to do it Mark McGrath now doing sports clothing? Chad
Been following your resto with interest Julian, wish mine was progressing at the same pace. In response to your question 'lead vs epoxy filler'...
Dan I would be interested in a pair, as soon as you could let me know a ball park figure I can confirm. Chad
I've just finished rebuilding the 42 DCNF carburettors on my Ghibli and have replaced the original open cage throttle shaft bearings with new...
Did you mean 0.03 and 0.05mm?
I would suggest that the device is not intended to introduce air into the intake but rather just blow cool air over the carburettors to help stop...
Just started to rebuild the heads on my 68 Ghibli and found the case hardening on the cam followers (cam buckets) looks suspect. The usual places...
Ivan Do you mean the vertical lip at the very lower edge of the sill and the same across the rear valance? If so I'm surprised at that as I've...
Julian, good work, always nice to see a Ghibli under the skin. The wheel well is quite a tricky fabrication, mine was thankfully OK but a friend...
There are quite a number of differences between RHD and LHD cars but I guess what you are looking for are the ones most difficult to change or...
Compomotive manufacture the replica Campagnolo Starburst wheels used on the Ghibli exclusively for Heinbrand HEINBRAND AUTOMOTIVE . Be aware they...
Thanks Bart, most useful. I actually have a couple of cans of this VHT Wrinkle Finish Aerosol (310ml) | Frost Auto Restoration Techniques in the...