© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
For background we live in Spokane, WA (with a population of about 210K in the city and total of 500K in the surrounding area). I have owned a...
For those of you that were interested in feedback directly from Pentosin on the use of CHF11S as an F1 system fluid replacement, the following is...
I forgot to ask you guys the following question in my original post. How much fluid do you collect when you siphon the old fluid from the F1...
Will do Terry. As soon as I hear from Pentosin I will post the response. Matt
Thanks Brian. I will definitely look at the Redline fluid. I was not aware that they manufactured an ATF.
Gents, Over the past month I have been trying to figure out what fluid to use to replace the factory fill F1 fluid, and use the process of...
Based on recommendations from a couple of the more experienced folks on this board I am going to do a flush of the F1 system by draining and...
I have to politely disagree. While carpet is a nice cosmetic thing to play with, the best ones are the ones that have the very sticky bits. I...
Attached is a unique picture of my 360 I suspect some of you will appreciate. The Ferrari is parked next to a Viperjet fuselage at the Richland...
Thanks Juri. I did search this forum but for some reason the search engine did not pick up any references to Siemens.
I purchased a replacement Tyco TCU relay and planned to install it today. I was surprised to find a Siemens relay in the car. The relay is...
Thanks guys!
I bought a spare relay for my '99 360 and was thinking about replacing the original after reading about some of you that replace the relays...
I would have been dead at 18 if my dad had given me a 500hp exotic, as would most 18 year old boys. My kids that drive (2 of 4) scare me...
Are you replacing the relay due to failure of the old one or just doing it as a precaution? My '99 has the original part and I bought a spare a...
Thanks DrDoug. Your jacking method sounds like the one to try. BTW - how many miles are on your car? I am hoping that my noise is just...
Thanks guys. I will check the exhaust, shock bushings and ball joints (in addition to the wheel bearings). Most likely method for me is to find...
I have to put my 360 up on jackstands to check wheel bearings this weekend. I do not have access to a lift and was hoping one of you has a...
It is possible but unlikely. We see the same thing you do (with your lasers) in the semiconductor world. Identically manufactured chips are...
Is there any way to visibly tell the differences between the stages?
