© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I own a Swiss QV. It feels great, but it's also the only Ferrari I've ever driven - so I can't offer a comparison.
Have pulled the vents off, and spent some time studying the current mounting situation. #1 - seems... if not correct, it's very close. #2 - have...
Wish I could adjust mine up towards... well, anything further than 5ft of road.
Or, just find someone with a press.
Right?
Oh, I'm sure it does. Just adding in that I've never needed to do it.
I've regreased, changed the cables, etc etc etc. Applied full 12V directly to the motor, and it's still slow. Sometimes it's just the fact that...
It's really the inside that makes the difference. Are the switches illuminated (I've never sat in a 328)? I think if you cracked the black box...
I've never removed the plenum as part of remove/install valve covers or cams (or the deck).
Was there any silcone-type sealant placed at the edge of the cam seals (and you removed it along with the gasket, before taking the pic), or was...
When I replaced the camshaft seals (leaked), I used the witness/assembly marks to reinstall... I wasn't aware that they aren't meant to be used...
It's really the small things... - applying sealant on the front bank when replacing valve cover seals. Hard for me to see/reach - dealing with...
My thought: why?
Next time, lead with that info. ;)
Walk away.
1. Pulley rotation is clockwise. 2. The crank pulley is always the one you're rotating. 3. I believe the bolt needs a 36mm socket (going by...
It's not as if breaking into a 308 is that difficult to begin with. I've (legally) broken into quite a few modern cars/trucks/SUVs for owners that...
FWIW, I have a hard intake tube as well (carbon, not metal.) I did have an issue at some point with unmetered air due to a hose clamp I'd left...
Depends on your location - where do you live?
Something tells me that Honda make a conscious choice to not use the K24 for their F1 solution. For one thing, it's missing 2 cylinders. ;)