© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have a yellow/black int, 04 360 spider, 21k miles, shields, Daytona seats, perfect 430 wheels, all services up to date, new rotors/pads. $8000...
What would fail on a heat exchanger to cause foaming or milky oil?
Is the central windstop the screen that goes in the middle of the headrests on the 360 spyder. Is yours new? If so, how much? Thanks
Im willing to pay a reasonable price for the 1/18 scale Ferrari Transporter by CMC. Must be in perfect condition with the box. Thanks Please PM
Im interested in the remaining valve covers. Can you post a pic? Also, you mentioned you can't find wrinkle finish paint? I believe Eastwood...
Any charger will work. Theres only so much you can design into one. Just make sure it has float mode monitoring. Most do! I would check to make...
I had a similar situation on an Aston. Spent hours on the forum. Took what I learned and started replacing fuses, batteries and switches. Gave up...
I've been using a Deltran "Battery Tender" on my 360. It's helpfull to find a long lead/plug to attach to the battery. The leads that come with...
Joerg thank you for pointing me in the right direction! I think I solved at least part of the mystery. It was the aftermarket radio causing the...
Thanks! Ive been using the meter. Before I start yanking fuses, i was hoping there was a common issue to start with.
Yep. Those were latched. Saw your post on that issue.
To avoid confusion I thought I'd start another post. I'm getting a 1.49 amp draw on my battery with everything off and all doors closed. Previous...
Gave up and took it in. The shop found the issue(s) in under two hours. In addition to what I thought were MAF codes, there were also misfire...
I agree regarding the relearn. Should have nothing to do with the CEL. Well I did it anyway. Now I am able to read the codes again. Odd. Looks...
Here's one for ya. Replaced a bad MAF that was causing the typical MAF codes. Replaced the oil pressure sending unit (works perfect now), and...
Well I suppose the question is, do I really need to reset the ecu for maf replacement? I would think the ecu would adjust as you drive with the...
Im going to replace a maf and an oil pressure sending unit. I see on posts that the ecu needs to be reset after the new maf is in. I asume this is...
A ha! Bet thats my case too. Yes I had the engine hood open. Will try it again.
I don't have a ctek charger. Anyone use other maintainers? Most of the maintainers are 1.25 to 1.5amp. Looks like the ctek is 5? Wow! What's the...
I hooked mine up to a "Battery Tender". Charge light comes on but eventually it goes to alternating red and green, which means possible bad...
