© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have mine recharged every year. Costs about $25.00.
What after market rotors will fit a 1980 308GTSI. I heard that a number of other vehicles use the same rotor at considerable price savings. Any...
Where can I get the red touch-up paint for the engine? Any suggestions would be helpful Thanks
8 years ago the stock exhaust was exchanged with a tuned aftermarket system and passed smog without any problem. This is the first time that I am...
California 90 Testarossa measured .70 on the CO% when .56 is the max allowed at the 25 mph test. The 15 Mph just barely passed. Tried the...
What year is it? I am in the area and drive a 90 TR.
NEED A SOURCE TO REPLACE THE 97 355 TOOLS, MANUAL, AND POUCHES THAT WERE STOLEN. ANY HELP WOULD BE APPRECIATED. 408 739-2605 . BILL
I am looking for replacements for the manual , tools and pouches for a 1997 355 that were stolen. Any assistance would be helpful . If you know a...
Replaced the rear brake pad on an 80 308 . The inside caliper on the driver side, after screwing it in with the allen, would not tighten back up....
It has always been a club rule that on a club drive that when in cue the rules of the road are a Ferrari never passes another Ferrari. This...
Thanks for the direction, I will add the wires.
When wiring directly into the relay terminals to bypass the white connectors, what is the terminal on the relay that should be used. It appears it...
Maybe the FIX is to cut the suspect harness wires and hardwire from the back. Any thoughts?
Since the TR fuse/relay assembly pcb overheats and degrades and the connection are so small from the harness, what can be done to improve this...
Thanks Steve for the excellent photos. I am in the process of cutting and splicing. Many Thanks
Solution found in the archives. Excellent photos
Have an intermittent problem with one of the fuel pumps not working. Found that tapping on the fuel pump relay,or in the general area on the...
Adapting 16X7 and 16X8 Mondial 3.2 wheels to my 80 308. What size spacers and lugs are needed for both front and rear. Hills did not know what the...
Noticed a small pinhole leak in my 80 308. Is there any recommendations for repair shops or replacement sources?
