© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I just wanted to say thank you to everyone for helping with this issue. I ended up sending the fuel distributor to Larry at cis flowtech to be...
System pressure is really high. My guage only goes to 10 bar, but it is pegged out. I guess that means something is wrong with the fuel...
I need a little help. I am not getting fuel out of the fuel injectors. The car hasn't run in a couple years. I have replaced: fuel pump, fuel...
#19 is now connected to the Microplex ECU and #35 is connected to the oil vapor seperator and still have the other one still not connected. Hose...
Yes, sorry forgot to upload, I have a 3.2. [ATTACH]
No, not running right now. But, if that hose goes there, then where does this one go? It was connected where the other one went, now this one is...
Does anyone happen to know where the vacuum hose from the ecu in the rear drivers side wheel well go to, mine is plugged into ecu but just...
The abs loom is run through its own tunnel, I have ran a yellow fish line to help illustrate in the attached photos from front to rear of car....
That is what I was thinking also or through the middle tunnel.
I need to run a ground wire off the battery to the trunk for the xdi electromotive ignition.
Would anyone happen to know the easiest way to run a 10 gauge wire from the bonnet area to the trunk?
I am sorry to revive this old thread, but it seems it just stopped and I was wondering, was an order ever placed and would anyone know how I could...
Does anyone happen to have a picture of the two ground straps installed? I have an 88 mondial 3.2, the diagram only shows one, but I took two off...
I need the part that covers the lower engine harnes, this is the cable https://www.ferrariparts.co.uk/part/ferrari/133925 but I need the wiring...
I need the wiring diagrams for my 88, I have been searching with no luck. Even in the forum, every link I come accoss to order or download, the...
I am having the engine in my 1988 Mondial 3.2 rebuilt and we need to replace the sleeves in the cylinders but I have checked, Ricambi, T....
The kit is for rear only. It looks like I have the 2 D rubbers for the rear and got 2 for the front, I will just save them for the future. Yes,...
Hello, I have a 1988 Mondial 3.2 and I am replacing the suspension bushings. I ordered the Bushing kit from Superformance but I have a few...
Oh, and I bypassed the battery shutoff switch and have power at the starter, but that is as far as it gets but no voltage drop.
I think I may have an extra cable attached to the starter. I have three cables attached to the stud on the starter and then the one connected to...