© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
It seems someone is making replacement glass now. I have no affiliation with the seller....
Check the front center locking cylinder to make sure the closed position switch is tripped. The toolkit has a handle for this or I've used a...
Don't the 360s have an odd mirror mount on the windshield?
My AC problem was dirty contacts on the "Stop" button. Compressor worked fine on "defrost" as this turns on the compressor without depressing the...
Just a little note on the brake light switch failure. If you can get your car going about 2 MPH, the F1 transmission will shift into gear from...
Turns on the flux capacitor?
Replacing that cylinder is a total pain as the hydraulic lines are not removable from the cylinder. So you have to pull the lines all the way back...
If the elastic band that pulls the center support bar above your head gets weak, it won't pull the bar back as the top goes down. As the top goes...
Wow! That really looks pretty nice. I'll try to find more pics. I do wonder how it attaches. [ATTACH] [ATTACH]
I was always under the impression that when the clutch is engaged, there is no hydraulic pressure on the release bearing. So the clutch would have...
The clutch disc expands when it gets hot causing it to drag on the pressure plate. This causes rotation on the input shaft in neutral which can be...
3d printed? Really? That is so cool. I wish I had thought of that.
Nice. And you're including the shipping?
I have a set of the silver 430 wheels I don't need anymore. PM me for pics.
It sounds like the actuator bleed screws again. Here's a link to a discussion on that issue....
I sounds like you might have rotation of the intermediate shaft because the clutch disk is dragging in neutral. There is an rpm sensor on the...
I think you're on the right track. Once the belly pan and rear bumper are removed, it's really easy to get to. I've seen loose bleed screws on at...
A friend here in San Antonio had a 430 spider with the Underground Racing twin turbo setup. It made something stupid, like 1300 hp on race gas. If...
The hydraulic connector looks like a normal pressurized air hose connector. It's near the right rear fender well and it's silver.
As far as I know, the service manual does not cover top disassembly. Just removal and installation. The parts manual does cover the individual...