© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I was eyeing the torch in the corner of my eye, will attemt not to burn down something important... Thanks!
Hello, I am in the process of doing a major on my Mondal T, on of the cams are a bit of from the assembly marks and I am trying to move the dovel...
Hi, I am currently checking the valve clearance of my Mondial t engine (from 1990, Motronic 2.5) and it seems that the inlet is in spec, all...
Hi again! Sorry for the lack of updates, life stuff came in-between the last weeks but now I took a fresh start with a better degree wheel with...
I was actually in the market for a Rolls Royce Silver Shadow, I found good candidates but she-who-has-to-be-obeyed was not aligned to my plans (I...
Continued: The troubles comes when I measure the exhaust: I get a opening at 57 before Bottom End Center, with is off by 3-4 degrees (I think I...
Hi! I am in the process of doing an engine out service on my Mondial T (1990) and I decided to check the cam timing before I re-install the...
Hi Wade and dfranzen, I agree, it is a cross platform question so I have reposted the question in the Technical Q&A Forum. Mods - this tread can...
Next step is now to check valve clearances and cam timing, sand blast the brake callipers (previous owner had done a quick and dirty rattle can...
...and the hand brake was not working well and funny surprise - on the left side the pin and spring that keeps the hand brake had come loose and...
Hi, I am overdue for an update - I think I have finally passed the point on the engine out service where I start to assemble stuff instead of...
Hi, The service has suffered "scope creep" and starts to feel more like a restoration, I have been posting in this tread - but I am due for an...
Wow, in my 2nd year of owner ship and I have finally started the engine out service! I have not been completely idle the last years with new front...
Welcome to the Mondial community! Changing the clutch was quite easy, I did the full dismantling and re-greasing with the help of the...
I believe that the AFF stands for Angle Follows Flat and concerns the mounting of the Ferrari 348 wheels... :)
Fantastic! That is excatly the sounds I would like to have, especially if it can go to "quiet" mode with a valve for longer drives and sensitive...
Hehe, yes indeed - I have a set of 348 rims waiting to be mounted as soon as I am done with the engine out. :)
Mine is mono-colour but when I am done with the service I plan to go back to original paint scheme on the chassis... In my eyes the original...
Hi! I have a yellow 1990 Mondial T where the previous owner, or one of his predecessors, decided to pain the black rocker panels and lower...