© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
My 1986 328 GTS would start first time, idle well until warmed up, then would start to rough idle, the plugs also looked too lean, so I thought...
In March my 328 suddenly stopped while driving. It would turn over ok but would not fire. After getting it home checked relays, fuses, removed...
I just did mine a few days ago. Might as well do both as you'll have to slide the pipe in and out of the other hose to fit the new one , a real...
This is what the Steering Rack bush may look like when pulled apart. This is at about 55,000km! [ATTACH] [ATTACH]
Here in Traralgon Australia! [ATTACH] [ATTACH]
I've used Meguiar's GOLD CLASS TRIM DETAILER (restore and maintain original richness to dark plastic and rubber) for many years and been quite...
I have a 1986 Ferrari 328 GTS which has two leaking heater control valves. You mentioned that identical valves were found with only minor...
Here's an exploded view of mine! [ATTACH]
I have a similar problem with mine! After I rebuilt my steering rack, I must have re-attached the the steering column to the rack one or two...
Mine is a late '86 Australian delivered 328. It has the same set-up ie 7" wheel and no Ferrari badge,[ATTACH] the same as in your photo!
Hi Robo, I made my own. I bought two bolts of correct size and thread pitch and cut the heads off. Works fine!
Can you tell us how it was applied and did you dilute the dye?
The bolt which broke has 3-12.9 RC stamped on it. I assume that it is an original. The ends of the bolts appear to be approx. 25mm away from the...
A few weeks ago I was pushing the car backwards in the garage. It would stop with a clunk and then I'd it push forwards with the same result and...
I had the same problem with mine. As can be seen, I had a huge chunk missing out of my seal. When I first tried to offer the seal and housing up...
Just a couple of photos I've taken of my car this year here in Australia! [ATTACH] [ATTACH]
I had posted this question on another forum without much success! The rear right side hand brake cable on my '86 328 (R.H.D.) has worn through...
Rob, Thank's for your article. I am wanting to remove my 1986 328 radiator. I notice in your article that you recommend removing the chin...