© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I've tried it with the seat in and out. Thinking of drilling the frame to fill with WD40 to see if that works.
Thanks. I've tried all of that with no luck.
Hey all, This is a very useful thread, so thank you for the info posted. However I've tried to remove mine, unclipped the leather and can...
Flow through the filter is good
I have rebuilt the fuel pump, replaced the filter and been through the hoses. All good. Set up a temporary supply from a jerry can and the flow...
Hi all, Sorry for jumping in on this thread, but wanted to ask all you knowledgeable people about the strainer in a '79 308. I appear to have...
Sorry to bring up an old thread, but my 308 indicator stalk has just disintegrated at the column end and the light switch column is cracked ready...
I'm looking for one too. 1979 GTS. My manual is not original to the car.
Thanks Steve. Both read 12v output, so it looks like a need to track down this in-line resistor.
[ATTACH] This is the new blower with the twin connector showing [ATTACH] This is the twin connector on the opposite side that somebody has...
Thanks for your reply. I bought the LHS Heater Blower Model Original SPA L30804076 from Superformance The new blower has 2 spade connections....
Thanks Steve but I'm not sure these are right for the heater blower / fans, they appear to be for the AC system. I'm looking at the fans...
Hi all, Sorry to resurrect an old thread, but I have a similar issue. I replaced a missing heater fan only to find it has one positive and one...
Hopefully the confidence will build again. I have been similar, years of taking the car all over Europe and Scandinavia and now just building up...
Good work. Think the drive will feel right. I had the same feeling.
How did it go Andy?
Good work, thanks for the update
[ATTACH]
I placed the multimeter across the terminals to read the resistance. Only similarity was the reading through terminals W to B. Don't know if...
I can't edit my post above, but have been corrected on my use of a multimeter and so the Primary results are actually 0.7 & 1.3 respectively