© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have front left side and a rear right side position lights out. I been looking all over on how to access these. I tied looking it up on here...
I want to thank you guys for all the help. The new Ferrari Flasher module fixed my problem. It's so nice having turn signals. SPM :)
Will do, Sorry and thanks for your help. SPM
I'm replacing both front and rear lid supports. The engine lid supports are pretty easy to figure out. Has anyone replaced the front one? SPM...
I never had a light burn out. Hopefully the new flasher module will fix my problem. As far as the 3amp fuse I could take it out and check...
The new Flasher Module will arrive in a few days. I hope that will solve the problem. Heres what I wanted to try to test the relay [MEDIA]
OK, I talked to a fellow Testarossa owner. When the button is pressed down its off, to turn flasher on I have to push button out. Totally opposite...
I would assume when it's almost flush (a little higher than panel) its off, when pressed in, its on. with that assumption... With the key off...
ill check it again, I'm assuming if the hazard switch button is in the up position its off, down position its on. Been awhile since i used it.
with the key off / hazard off I get 12v with the key off / hazard on I get 0 key on / hazard on i get 12v key on / hazard off i get 12v
Any hints on how to get the hazard button out. I was able to get the black square cover off. SPM
Got the multimeter out, im getting 12v on the brown wire with the key off, with the key on I also get 11.9v I found a oem module and ordered it...
The module did not fix my problem BUT it was from local parts store. They did say it was compatible. I will get my multimeter out and check what...
It does have an after market radio with 10 CD changer in the trunk. Radio does work when 3 amp fuse is out tho. SPM
The single red wire is from the 3 amp fuse, the red wire on the other side runs back into the car, the 2 other colored wires runs into the panel...
Heres the connector that the relay plugs into with that 3 amp fuse connected to it. Hopefully these pics are better. [ATTACH] [ATTACH]
Thanks for the help, I took the flasher relay apart and cleaned the contacts. Still did not work. I was curious what was inside that thing :) I...
I removed the tape and traced one of the red wires to the device in the first pic, the other red wire runs into the big mess of wires running into...
Maybe it needs a bigger fuse?
hard to get good pics of it [ATTACH] [ATTACH]