© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
My 308 has survived 20+ years of Texas summers and have chased high temp indication for many years, slowly chipping away at it. Some of it has...
Update. Short answer is the system is now charged and giving me 65 degree vent temp at 93 degrees ambient. High side and low side pressures are...
Thanks for the tips and suggestions so far. I got in touch with Old Air Products and ordered some 90 degree connectors that may allow me to extend...
I've gotten partway through diagnosing my A/C not working and before going down the rabbit hole further, I'd love a little advice on the next...
Thanks to the good people at Ferrari of Austin, they were able to get official information from the factory. Looking into a build-sheet but got...
Rule of thumb is that you will need the two car heights + 10 inches to account for lock spacing & runway thickness. By that standard, you would...
Yeah, that’s tight. a wall mount opener has the shaft a couple inches from the ceiling. [ATTACH] My lift guy didn’t seem to have a ton of...
I’ve been happy with how quickly I can get the car going off the lift. It doesn’t really affect how often I take the car out, but I was probably...
Yup. My garage ceiling is 10'6" but the original garage door was a standard overhead model so it only went to the top of the door itself - maybe...
That’s an interesting idea. Hadn’t considered it. This thread did spur me to contact Ontario Motor Vehicles and see if I can get a vehicle history...
My 1979 308 GTS was originally imported/sold by Yonge Steeles Motors but it (currently) has all of the characteristics a USA model. Back then, was...
Fascinating. Glad to see this resource exists. I had tried to get one of those certifications back in early 2000 with no luck. I'm seeing...
Oh, and if you want lift opinions I gathered while researching my lift, you can find 50 posts on another forum.
Started a thread :-) https://www.ferrarichat.com/forum/threads/4-post-lift-recommendations.700956/
I posted about my 4 post lift purchase and @stoked_7 and @Yoric had some questions. Putting follow-ups here since there are lots of opinions on...
that story has its own thread on another forum because the blue car is really wide. I took a ton of measurements and tried to get testimonials....
Just had a lift installed this week and inaugurated it with an oil change. Got the lift so I could stack the cars but man what a game changer on...
For reference and posterity For my 1979 308 GTS North America PT Performance 13/16ths T-handle (https://www.amazon.com/dp/B000N35LZS) - too...
Sean and Mule's posts reference a 5/8inch socket. NGK BPR5ES plugs take a 13/16ths socket. Is 5/8ths for a different plug?
Had mine replaced in 2006. Note there's a difference between the North American and Euro versions. North America has an additional wire for the...
