© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
[ATTACH][ATTACH][ATTACH] Sent from my iPhone using FerrariChat
Reviving. Anyone willing to part with an old spark plug boot for the 456/M / 550? I’ve had one fail and they are truly unobtanium. Alternates are...
Nice surprise discovery which is motivating my move to this COP kit - this is the state of 4, 5, 6 coil ends at the pack. If only this could have...
Resurrecting. Seems simple but I need guidance on how to connect a line to the end of the fuel rail to drain the gas tank. Seem simple but can’t...
Forgive me if this already posted. At $116k time of posting with 1 day remaining.....
Have a note out to John and interested in anyway to make this better :) I’ll pay you for the bump :) Thanks Sent from my iPhone using FerrariChat
Resurrecting this thread. Has the COP kit for 456m been made avail by anyone? My left bank coil just threw up, and would rather upgrade to the...
Thanks sir Sent from my iPhone using FerrariChat
Already been down this road. called them all. google misrepresents... Sent from my iPhone using FerrariChat
I’ve loved mine ever since jagbuff loaded them years ago - mounted on hills type 2 in rear and run with 345 Michelin sport 4S (love the ride!)…...
Resurrecting. Does anyone have a good Contact for a place that will repair the oem denso alternator? I’ve replaced with the marine version but...
It was for me. They did an amazing job and its lifetime warranty. Sent from my iPhone using FerrariChat
[emoji813]️[emoji813]️[emoji813]️ Sent from my iPhone using FerrariChat
[emoji1316][emoji1316][emoji1316] Sent from my iPhone using FerrariChat
Thank you!! Sent from my iPhone using FerrariChat
Following another threads recommendation I used 4” diameter and it worked great. Any will do. Sent from my iPhone using FerrariChat
Love this forum for threads like this! I also followed the recipe on my 456M and installed the very nice aircraft spruce ducting. Here’s pix of...
Progress on the 3d prototype for the plug wire runner. Templated against the cam cover ridges and connection points. Dialed in…next will be a full...
Thanks! We are going to clean the threads with a tap tool before installing replacements as we are guessing the top threads are probably...
If it works I think we’d be happy to share the file gratis. My intent is for a full size print (no joints/gluing) with the proper materials that...