© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
If it's in the left front of your Mondial then thats your overflow brake fluid. The system overpressurizes and the fluid comes out the top of the...
Hey man! I drive an 86' Euro 3.2 Mondial.. and really do love what you did with yours. Love the low stance - seems to be the best part! Did...
Hello Sir, Does your engine have "inner" cam belt covers? I'm referring to covers on the engine side to hide the timing belts. On my 86 3.2 one...
Dave what about the wheel well, you dont have to remove it?
I'm not a big drinker... I'm new to cognac and recently ordered some directly from France. It's tasty! So how many of us Ferraristi are cognac...
So today I started the car, drove, stopped, shut off. A few times. No issues. Just a sticky ignition switch most likely. WD40 worked very...
Right, thank you Wade. I suspect my issue could be something faulty in the steering column with respect to some of the mechanisms internally....
Sprayed wd40 and the key is moving in and out nicely. Turns also. Didnt start the car yet, but it will turn far enough to start. Question is...
Mechanic (yes this decided to happen on my way leaving a service- I didn't mention that initially) did spray some lock lube and that seems to help...
Hey guys out of nowhere the key gets stuck in the ignition. It wont turn, and takes a couple minutes of gentle wiggling to free it. This just...
Looks like thats what they call closed cell foam. Incidentally, are you treating the leather with anything? Vince
Hi there.. So in lowering your Mondi, have you found any negative implications in doing so? Like change in steering, tires scraping the wheel...
Steve, thanks for that info. I check my 3.2 Euro Spec both cold and hot (or, engine that's been run a bit and right after shutdown) and am having...
Thanks Rob! So just the one screw at the rear and the front rakes use double sided adhesive tape? On my 3.2 someone actually used a small screw...
Incredible color combo, with that tonneau cover
That is really some in-depth analysis, some of it I understand, and some I dont. What sends a flag up is having to lengthen the upper A arm by a...
afterburner, but also the center of gravity is lowered at the front of the car, vertically following the static roll center as well. So how much...
Just looked that up ouch that’s $1400 I can put towards the next belt job. Need less cost solution.
What brand/make of coils/shocks did you use up front? I'm looking to do the same thing. The car looks like a Jeep with that spacey gap around...
