© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hello Steve! It's 2. It does not start, and will only cough a little. Guessing it will initially get some gas. He has tried with start gas in the...
Sorry for answering late. This is a F113A040 (US version KE-Jet with Lambda). I will search thank you!
Hey guys! Wanted to run this issue by you. My friends Testarossa is not starting, and we are trying to source the problem. The car does not...
We have started on the engine again, and this time the dreaded liners. The Classic V8 liners are viewed as a nightmare, though this far we have...
Sorry for not answering so quickly Mike! Not in here that often. You can reach me quicker by email if you want. Send me a PM. I have not removed...
Working on the brakes currently! After that the front shocks. After that going back to the Engine. [ATTACH]
After several heat cycles we got it off. That gear is a tough sucker that is for sure. Tackling the liners is the next job in line. As well as...
Struggling a bit with detaching the oil pump from the crank. Anyone done this? Have proper puller, tried heat and all the tricks in the book. No...
Continously working on it. Just been to busy to post. Some pictures here! More and more parts finished! [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
Thanks for the tip. If we need some parts we will get in touch!
Heatshield is around the starter, to protect it from the headers. I think the wiring might melt unless it's there. In the long run though. Beers...
Project continues. Gotten a lot of parts back from Chrome treatment, but need at least one more visit to that shop. Started to putting some of the...
All pistons are out and we can now see what needs to be changed. So far 1 piston and two liners need to be changed. But considering the age of the...
Correct, same Jarle! I think about 5 people in the world with that name combination :) 1982 4900 Automatica!
Good idea! Here are some! Everything is beeing stripped, blasted, painted or zinc treated. We try to get the right treatment on the right places....
There are some myths around working on these cars, so just wanted to write a short post about it. 1. You can get the headers out with the engine...
Engine out yesterday. I must say it went without any big problems. To my surprise to be honest. Anyway, next up is to assess the general condition...
Glad we are several in this boat :) I've heard some rumours that splitting the trans and engine in situ is not easy. Can anyone confirm this? From...
Cleaning carbs tonight! Three stage prosess! [ATTACH]
Hey guys! Got a question. Removing my QP3 engine one of these days. You usually take the engine out with gearbox or do you split them and take out...
