© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
With the gearbox filter/screen inspected and if showing signs of clogging will be removed (likely removed regardless), what is is seen as the...
As per subject, looking for how oil lines look inside the 360 heat exchangers. Have been running Red Line Lightproof Shockproof gearbox oil...
Around 3 years old.
Ok cool and this would correlate with higher temperatures? Car hasn't had anything done to it recently other than replacement of gear selection...
Getting a high pitched whistle/whine from engine bay that's started recently, toward back of engine/exhaust area (left hand side). Hard to...
Any experiences with the use of Redline LightWeight ShockProof on 360/430 transaxles? Starting to get some grinding (gated car) upshifting from...
Thanks both. Ended up being exactly as described. Sleeve at the end of the fore-aft gear cable was damaged/dislodged. Mechanic has wired tied...
2001 360 manual transmission. Out on my leisurely weekend drive and all of a sudden 1st/3rd/6th gears (top of the gate) won't engage (mushy...
About 4 years ago attended to a full clutch job on my Ferrari 360 spider manual by an experienced Ferrari trained tech. This included a new Hills...
Bump. Anyone else that can vouch for this unit (or in the process of trying), or reasons it may not work as above? Need a new compressor shortly...
Understand that alternative 360 compressors can have different (variable?) displacement valves (Green color on stock compressor, these white...
Story sounds fair and reasonable... Except experience & facts documented in this thread contradicts fair & reasonable. Any reason why...
Fabspeed's commitment to honoring "lifetime" warranty on headers (inc coatings) is to make it up to customers in the future? How about Fabspeed...
Get that, we'd have used correctly sized washers if we went down that path. Purpose was to see what thread was left with use of a washer. 1-2...
Copper washer was originally considered and trialed however given how little thread there are on bungs (and thread being a little chewed up,...
Update on previous thread - http://www.ferrarichat.com/forum/360-430-sponsored-yellow-compass-group/532084-fabspeed-issue-needing-resolution.html...
Car is in for some work with tech (exhaust, headers, clutch). He's discovered that the immobiliser is inconsistently disarming itself after a...
Aldous (author of blog) has kindly pointed me here for a source of the bushes. Initial measurements of bush on car seem to match with this source...
Trying to source the spider gasket for the intake compensating valve (picture below). Doesn't appear to be a separate part looking at parts...
Trying to source set of intake manifold butterfly valve shaft bushes for the 360 (bit of play in butterfly valves). Tech believes these may be...
