© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I own one, I didn't take it last time I was on the car as the job was on the TCU, I did'nt imagine an immo problem arriving on the car :)
Fuse PDF13 if you prefer and relay PDR1 were changed ;)
Car is fixed !! Fuse F13 was dead (but was looking good) and relay PDR1 changed. No more immo problem, car back on the road ! Special thanks to...
When reading the datastream on the TCU, the "break switch state" is fully relevant with my foot pressure on the pedal so maybe one of the two...
Hello, here are the latest news : Car is almost fixed but we have a new problem !!! Since our last visit the owner has turned off the battery at...
@flash32 : do you confirm : DEIS / reboot OBD tool / DEIS ? Thanks.
Thanks, I will give all the informations to the owner. Next step, perform the tests you proposed on the car and then I'll update the post :) To...
To fix the sensor, we need to disassemble the gearbox ?
Ok, never tried a maserati page for a ferrari :) Do you assume it is labeled DEIS in the tool ?
Understood, will do, easy job :) DEIS for you is "autocalibrate procedure"/"self learning", which engage every gear several times ? We did it,...
The car performed about 1000 km in one year before the problem that occurs as soon as the hose was disconnected and some tests with a topdon done....
The owner try today but he can not start a bleeding procedure (or any procedure) and look at the datastream. As soons as he quit the procedure,...
Yesterday we had 3 tools, we did not use the tool of the owner, which I didn't know ....
Breaks are useless when you own a scuderia :D
Crazy ! Your test is conform with what is in the owner manual. Please note that at the very begining, the dashboard only shows N and nothing else...
Owner is asked, don't know if he can perform the test alone, will see. The break pedal sensor of this car is a 4 wires : [ATTACH] The owner...
When looking deeply in my documentation, the symptoms looks like a "clutch position sensor recovery" strategy ! No idea to get out from this ...
By looking back to all the gathered data, I just find the error code 02B6 in the "Parking sensor" may this code be the bad guy ? Nevertheless,...
Which ECU is in charge to transform the analog signal from the break pedal switch to a CAN data ? By the way, break switch condition...
We performed some tests on an another EU F430, but a 2005 one with CFC231 : the only way to change the gears with the paddles is : engine hatch...
